1971 Cuda 340Engine compartment pictures please.

[Manuel]

Hi,

Took my Cuda to the paint shop, we are now missing some details as to what was that small hole for etc...

Would like to finish it up as original as posible and wonder if you all could help me out by sending pics.

Also from the lower part of the hood if you can.

With best regards,

Manuel

[76orangewagon]

Hi,

Took my Cuda to the paint shop, we are now missing some details as to what was that small hole for etc...

Would like to finish it up as original as posible and wonder if you all could help me out by sending pics.

Also from the lower part of the hood if you can.

With best regards,

Manuel

Manuel...lets start with this picture and go from there ...what small hole are you referring too ?

[anlauto]

Yup...snap some nice clear pictures of your firewall and inner aprons and we'll make sure you fill all the holes that don't belong 

[Manuel]

Thanks 76 and Anlauto

We found some previous pics today so will work on that and let you know but here 2 Q's

What are those 2 small holes to the left of the bolt holding the latch for?
Plugs for them?

And the lower hole on the other pic?
Pluged?

[Manuel]

Sorry for the inverse sequence. 

There are an additional 2 of those holes to the right of the latch base. 

Do not know why the pic rotates...

[Manuel]

Could someone post a pic with the correct screws that hold the large chrome segment at the base of the windshield pls?

[anlauto]

Those holes are on every hood...not an issue

[Manuel]

How nice to see the level of restaurations that you guys do. 

[76orangewagon]

Could someone post a pic with the correct screws that hold the large chrome segment at the base of the windshield pls?

You can get the correct hardware set from Rob @Hoover auto parts  on ebay. just search "70-71 Cuda Challenger Windshield Trim & Wiper Pivot Bolt and Trim Set"