Andy's 'cuda

[blown motor]

@Chryco Psycho @Dmz73  A plan? Do tell.

[HP_Cuda]

Is this standard front disc/rear drum brake setup?

[blown motor]

Is this standard front disc/rear drum brake setup?

Yes.

[HP_Cuda]

If this is correct I will order the lines from Dr Diff and send the clips I already have.

B

[blown motor]

I believe the car is a 72. The fender gills were added by Andy and Cathy.

[Chryco Psycho]

What about -
- ps mounts
- Alt mount brackets
- throttle cable & bracket
- kickdown
- fuel line tank to pump
- headlight adjuster hardware
- Engine wiring harness , battery cables
- Grille mounts

I am assuming the steering is all done / connected
is the interior completed ?

[Chryco Psycho]

You can clearly see the one piece proportioning valve in the picture on pg 3 or 4 so we need brake lines to match that system , probably all 72 parts

[Dmz73]

What about -
- ps mounts
- Alt mount brackets
- throttle cable & bracket
- kickdown
- fuel line tank to pump
- headlight adjuster hardware
- Engine wiring harness , battery cables
- Grille mounts

I am assuming the steering is all done / connected
is the interior completed ?

All front of engine accessory drive brackets, bolts and pulleys have now been purchased, including PS pump bracket and alt bracket.
An alternate Alternator  may need to be purchased, as there is a new one, with a Serpentine belt pulley already in their possession.

Engine harness/forward harness is new.
Throttle kick down cable is a new Lokar kit.

Fuel lines from tank to engine might already be in. I'll need to double check once more. Pretty sure they were installed.

Need:
Solid Brake lines are not yet purchased for the car. Car is a 72. Disc front brakes. Still need soft front brake lines from solid line to caliper
Need:
Solid fuel line from fuel pump to carb.

Need:
Rear drum brake kit. (See my prior comment for size)

Positive Battery cable is present. I have a spare ground cable if need be. Will verify with Cathy.

Solid fuel line clips are in Cathy's possession

All cooling/radiator hoses have been purchased. A hose from the power booster to the intake manifold has also been purchased
New hose clips have been purchased

May need:
Some misc front headlight hardware for the headlights. (I will purchase a set just in case we don't have one)

Build plan:

Thinking about the 4th of July to July 6th-ish. I'm going out of town the next day, and I know other peeps are headed to Carlisle.

I can't wait!!!

Dan Zimmermann



Sent from my iPhone using Tapatalk

[Dmz73]

If this is correct I will order the lines from Dr Diff and send the clips I already have.

B

Please order for a 1972 Cuda.

Thanks!!


Sent from my iPhone using Tapatalk

[Dmz73]

@Chryco Psycho @Dmz73  A plan? Do tell.

Thinking the 4th-6th-ish.
I'm leaving out of town the next day to pick up my son from camp up north.
I could do earlier as well!

Regards,
Dan


Sent from my iPhone using Tapatalk

[blown motor]

Dan, can I just contribute some cash when I come or would you prefer Paypal?

[Dmz73]

Dan, can I just contribute some cash when I come or would you prefer Paypal?

Murray,
You can contribute whatever you want whenever you want.
If you want to PayPal me, just dm me and I'll give you my info.
I'd like to make sure we have all parts in hand when we go to put this together.
Still a few big ticket items to get.

Dan


Sent from my iPhone using Tapatalk

[Dmz73]

Positive and negative terminal cables check.

Trans cooler lines check.

Still need a battery.


Dan


Sent from my iPhone using Tapatalk

[blown motor]

I might have a battery we can use. Changed out the one on the generator at the other house as part of routine maintenance. I can get it checked next week to see if it`s good to go.

[BIGSHCLUNK]

Here's maybe a weird question.... is there mounting bolts for all these parts???