Main Menu

Andy's 'cuda

Started by dodj, April 30, 2018, 06:06:06 PM

Previous topic Next topic

0 Members and 3 Guests are viewing this topic.

BIGSHCLUNK

Quote from: jimynick on June 15, 2018, 06:43:04 PM
Quote from: BIGSHCLUNK on June 15, 2018, 04:18:49 PM
Here's maybe a weird question.... is there mounting bolts for all these parts???
Hey Chris, are you going to this one? Is Brad do you know? Maybe we can do the 3 in a room thing again?

It's not looking like schedules will coordinate on this one. As for the 3 thing.... my sleep habits have really chamged, I'm up constantly. You guys would kill me...  :stop:

MEK-Dangerous

I did send Cathy a check a few weeks back for anything that might be needed. It hasn't been cashed yet.  I just hope it wasn't "lost in the mail".

HP_Cuda


Dmz/all

I ordered the brake line to be sent to Cathy's today so it should be there when you guys start back in.

I will also snail mail the clip set I have for the brake line to Cathys today or tomorrow.

Cheers,
Bryan
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200


blown motor

@HP_Cuda  Thank you so much. Before you mail the clips check with @Dmz73  I think he told me the other day he had a clip set.
Who has more fun than people!
68 Charger R/T    74 Challenger Rallye 
12 Challenger RT Classic    15 Challenger SXT
79 Macho Power Wagon clone    17 Ram Rebel

HP_Cuda


Hey @Dmz73

Do you have the clip set already?

Let me know,
B
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200

Dmz73

Quote from: HP_Cuda on June 19, 2018, 02:26:47 PM

Hey @Dmz73

Do you have the clip set already?

Let me know,
B

There is a clip set at the house. Dunno how many, but it's a packet.
I'll check with Cathy when I get back into town.

Dan


Sent from my iPhone using Tapatalk

Chryco Psycho

#126
fuel line
exhaust, muffs , tips
fluids for everything
driveshaft / u joint , retainer straps
nss
volt reg
taillight harness

die grinder
flare wrenches
tube bender
tube flare kit
meter


jimynick

Talking to Neil tonight, we did some brain searching about what Andy's Cuda needs to finish it. Things like the proper proportioning valve, trans kick down bracket, throttle return spring and brkt, proper sized rear brake shoes and hrdwre, trans cooler and plumbing as it has an aftermarket alum rad, shroud, fluids, voltage reg, interior pieces to finish, t/lamp wiring, battery/hld dwn and brkts, cables, etc, etc. Then there's the question of funds, is there any interest in members being able or willing to contribute via an agreed method to Kathy to help cover incurred costs? Are there any other members who'd be interested in attending/working on the car?  Just some thoughts that I wanted to throw out to the members of the forum for discussion. It sounds like Neil and the Canadian contingent would be going the morning of July 4th and Dan has to bail by July 6th I think it was.  :thinking:
In the immortal words of Jimmy Scott- "pace yourself!"

Chryco Psycho

Any thoughs on where we could crash , Safe Cheap hotel nearby maybe , couch  :thinking:

blown motor

Quote from: Chryco Psycho on June 21, 2018, 10:16:24 PM
Any thoughs on where we could crash , Safe Cheap hotel nearby maybe , couch  :thinking:

Working on it. Looks like either Comfort Inn or Baymont, both close by.
Who has more fun than people!
68 Charger R/T    74 Challenger Rallye 
12 Challenger RT Classic    15 Challenger SXT
79 Macho Power Wagon clone    17 Ram Rebel

BIGSHCLUNK

Quote from: blown motor on June 22, 2018, 05:54:11 AM
Quote from: Chryco Psycho on June 21, 2018, 10:16:24 PM
Any thoughs on where we could crash , Safe Cheap hotel nearby maybe , couch  :thinking:

Working on it. Looks like either Comfort Inn or Baymont, both close by.
When I originally looked that was it for close by.


Dmz73

Quote from: Chryco Psycho on June 21, 2018, 09:17:48 PM
fuel line
exhaust, muffs , tips
fluids for everything
driveshaft / u joint , retainer straps
nss
volt reg taillight harness

die grinder
flare wrenches
tube bender
tube flare kit
meter


Meter: Check
Voltage regulator: 2 new to choose from
Die grinder: I have a dremel, and a grinder
Tail light harness appears to be new and is already installed

Hard Fuel line is installed, not sure of the diameter

Exhaust system can be ordered
CV joint and the driveshaft are installed
Dan


Sent from my iPhone using Tapatalk

blown motor

Ian has a tube bender, not sure about a tube flare kit. I have flare wrenched, I'll bring them.
Who has more fun than people!
68 Charger R/T    74 Challenger Rallye 
12 Challenger RT Classic    15 Challenger SXT
79 Macho Power Wagon clone    17 Ram Rebel

Chryco Psycho

Ian had all of the tools I listed just wanted me to post a list as a reminder to bring them
If we are ordering TTi for example , are the headers TTi ??

Chryco Psycho

Ok Headers look like Hooker with the plate on the left header tube , Could be Headman ?
Any way we can know for sure & get exhaust ordered now / soon so it there when we arrive  ?
Anyone else going to be there ?? Or is it just the 4 of us ?