Main Menu

What is everyone doing Today?

Started by Timbbuc2, April 25, 2017, 10:17:22 AM

Previous topic Next topic

0 Members and 6 Guests are viewing this topic.

usraptor

After finally finishing my 17-year old fishing boat re-flooring project, got back at the 'Cuda for the first time since I got it back from being painted.  Put the carb and throttle linkage bracket back on, measured what length throttle cable I needed, posted a question re it on E-bodies, did an oil change, took out the new electronic distributor and adjusted the air gap; replaced said dist. Replaced the valley pan hold down clamps with billet ones and added the new ECU bracket to the rear VP hold down bracket.  Much cleaner than having it on the firewall. 

RUNCHARGER

Argh: Moving, small garage again, scheming how to make as much room as I can.
Sheldon

Topcat

Quote from: usraptor on May 13, 2017, 06:26:31 PM
After finally finishing my 17-year old fishing boat re-flooring project, got back at the 'Cuda for the first time since I got it back from being painted.

if it's a restoration, we need pictures.
and fishing stories too,  :yes:
:needphotos:


73440

Quote from: Topcat on May 13, 2017, 10:44:01 PM
Quote from: usraptor on May 13, 2017, 06:26:31 PM
After finally finishing my 17-year old fishing boat re-flooring project, got back at the 'Cuda for the first time since I got it back from being painted.

if it's a restoration, we need pictures.
and fishing stories too,  :yes:
:needphotos:

A fishing story , I caught a fish that was so big, the photo alone weighed 5 lbs.

HP_Cuda

Working on a new project.

Muahahahahaha   :vipermanhiding:
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200

ec_co

grabbing some parts and the damn heater core in my Dakota decided it was a good day to blow out   :steamingmad:  hot steam everywhere (good thing I was stopped when it blew) and 1.5 gallons of radiator fluid sitting in the carpet now :(  lucky I was close enough to harbor freight to grab a line clamp set, pinched off the heater lines and added enough fluid to get me home 


:thumbdown: to today
Growing older is mandatory...growing up is optional.

Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came

Brads70

Father and son time today with my oldest. We changed the exhaust ( muffler and tail pipe) in his Jeep
:wrenching:  Very easy job really. Nice to see HIS hands dirty for a change! :bradsthumb:


Marc70challenger

Cool Brad!

We took the Challenger out for nice drive.  Did a little walk on a late 60's mustang that was too curious as to what we had ....  :burnout:   

jimynick

Drove 170 miles to have a 1 hour breakfast with my mother- you guys DID remember that it's Mothers Day, right?- then finished tearing out the old fence, tore apart and renewed the BBQ and finished by BBQing the strip loins which we enjoyed with the boys. NEEDED that first beer!  :cheers:
In the immortal words of Jimmy Scott- "pace yourself!"

Brads70

Quote from: Brads70 on May 04, 2017, 01:23:38 PM
Just thought I'd pass this along. I service small engine equipment for a living. I'm finding more than usual, mice nests even in push mowers from over the winter. Maybe give your equipment a quick look over. They like to chew wiring....

Another one yesterday.....

usraptor

Quote from: Topcat on May 13, 2017, 10:44:01 PM
Quote from: usraptor on May 13, 2017, 06:26:31 PM
After finally finishing my 17-year old fishing boat re-flooring project, got back at the 'Cuda for the first time since I got it back from being painted.

if it's a restoration, we need pictures.
and fishing stories too,  :yes:
:needphotos:

Okay, here are some pictures of the boat.  Unfortunately, I don't have any pictures of fresh water fish as they are on my older computer.  Will this do?  247 lb yellow fin tuna caught on a Long Range Fishing Trip out of San Diego last Nov.


usraptor

And to answer the topic at hand, since it snowed 6 inches last night, I took the day off of doing yard work and working on the 'Cuda to doing some inside the house projects like continuing to weave a Eagles head against an American Flag on a Salt water Tuna rod I'm building and installed a Scalia Rider PackTalk on my M/C helmet and watched several You Tube videos on how to program it in preparation for this Sat's club ride, and promptly fell asleep in front of the computer.  :rubeyes:

73440


Topcat

Nice Tuna usraptor.   :worship:

Well today I received an e-mail from the West Coast Division developer of our company: Express Employment Professionals.   

I've been awarded as one of  the top 50 in sales for a Business Development Manager in North America. 

Rev-It-Up

Quote from: Topcat on May 17, 2017, 06:50:27 PM
Nice Tuna usraptor.   :worship:

Well today I received an e-mail from the West Coast Division developer of our company: Express Employment Professionals.   

I've been awarded as one of  the top 50 in sales for a Business Development Manager in North America.

Congratulations Topcat!  :banana:
Rev-It-Up