Main Menu

Driveshaft for '70 Challenger 340 4 spd

Started by erik70rt, April 02, 2025, 06:21:29 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

erik70rt

WANTED:  Driveshaft for a 1970 Challenger with a 340/4 spd/8 3/4.  Should be 3.25 x 45.6 long.

What do you have? 

Thanks!

PM me here.
Contrary to the opinions of some, I am not dumber than I look.

Cuda Cody

As far as I can recall, they didn't put part numbers on driveshafts, or at least the numbers didn't hold up long so they might be super hard to see.  Most large cities will have a few really good driveshaft places that can make you a brand new one that will be perfectly balanced and fit right in.  I'm not saying don't try to find a good used one, but if you can not locate one, don't let it slow you down.  :twothumbsup:

blown motor

Would it be the same as a Cuda? Something tells me no because the Cuda was a shorter car but I don't know where it lost the length. A buddy just took one off of his when he switched to a five speed.
Who has more fun than people!
68 Charger R/T    74 Challenger Rallye 
12 Challenger RT Classic    15 Challenger SXT
79 Macho Power Wagon clone    17 Ram Rebel


RUNCHARGER

Cuda one is shorter. I have a correct one out of a 340 Challenger but won't ship it. They are out there, you'll find one.
Sheldon

mtull

Quote from: erik70rt on April 02, 2025, 06:21:29 AMWANTED:  Driveshaft for a 1970 Challenger with a 340/4 spd/8 3/4.  Should be 3.25 x 45.6 long.
There's one for sale with similar dimensions on Facebook.  I don't know the seller nor have I ever done business with them.  1970 Mopar E-Body Driveshaft.  The seller states it's from a Cuda however the length stated in the add is 45.5".  If you don't have access to Facebook but are interested I can try and get the sellers contact info for you.

1970 Plymouth Cuda Driveshaft
45.5" Ctr to Ctr On U-Joints
3.25" Tube/3" Wide Yoke
Fits Mopar E-Body W/727 Or 4-Speed
W/340/383/440 W/8 3/4 Rear
No Dents/Nice Clean Driveshaft
Pulled From 70 Cuda W/340
$175