Driveshaft for '70 Challenger 340 4 spd

[erik70rt]

WANTED:  Driveshaft for a 1970 Challenger with a 340/4 spd/8 3/4.  Should be 3.25 x 45.6 long.

What do you have? 

Thanks!

PM me here.

[Cuda Cody]

As far as I can recall, they didn't put part numbers on driveshafts, or at least the numbers didn't hold up long so they might be super hard to see.  Most large cities will have a few really good driveshaft places that can make you a brand new one that will be perfectly balanced and fit right in.  I'm not saying don't try to find a good used one, but if you can not locate one, don't let it slow you down. 

[blown motor]

Would it be the same as a Cuda? Something tells me no because the Cuda was a shorter car but I don't know where it lost the length. A buddy just took one off of his when he switched to a five speed.

[RUNCHARGER]

Cuda one is shorter. I have a correct one out of a 340 Challenger but won't ship it. They are out there, you'll find one.

[mtull]

WANTED:  Driveshaft for a 1970 Challenger with a 340/4 spd/8 3/4.  Should be 3.25 x 45.6 long.

There's one for sale with similar dimensions on Facebook.  I don't know the seller nor have I ever done business with them.  1970 Mopar E-Body Driveshaft.  The seller states it's from a Cuda however the length stated in the add is 45.5".  If you don't have access to Facebook but are interested I can try and get the sellers contact info for you.

1970 Plymouth Cuda Driveshaft
45.5" Ctr to Ctr On U-Joints
3.25" Tube/3" Wide Yoke
Fits Mopar E-Body W/727 Or 4-Speed
W/340/383/440 W/8 3/4 Rear
No Dents/Nice Clean Driveshaft
Pulled From 70 Cuda W/340
$175