Main Menu
avatar_ec_co

Fender Tag reproduction service

Started by ec_co, April 06, 2025, 05:59:30 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

ec_co

 After the initial launch and evaluation, I've lowered the price of tags and I'll extend the exclusive E-Bodies.org 25% discount throughout 2025, just use the same ebodies2025 discount code at checkout.

 So far I've produced and sent over 20 tags for A, B and E bodies plus several custom message tags. My favorite real tag so far has been a '70 Superbird, they also received a Jumbo size for easier display when showing it. All positive feedback, zero complaints.

 These 3D printed plastic Mopar Fender Tags are a perfect addition to your classic Mopar. If you want to preserve your original Fender Tag to keep it safe, this is a great display option for your car or truck. These are not perfect reproductions (the #1 and Letter C for example), and they are not meant to be construed as such to avoid fraud - if you want a metal reproduction tag that is closer to perfect, there are other vendors for that, but it will cost you a lot more $$ than my product. Your security is very important to me, your personal information will never be disclosed.

UV, Heat and Weather resistant - automotive grade material used

Email me BEFORE ordering so that I can create/show what your tag would look like. See it before you buy it! eyecandi3d@gmail.com

I have an Ebay shop as well, but their fees suck and the discount code doesn't work there. Please use www.eyecandi3d.com

All Fender Tags are shipped non-painted so you can paint them in your body color. Primer/Filler is highly recommended prior to painting.

These are the '69-'74 version for A B C and E Bodies : regular size/$40, Jumbo/$60, HEMI/TA/$12

I'm currently testing out the '70-'71 printed center caps, I sent one off to FL for testing and I'll be installing a set on mine to test durability. They weigh 1lb less than originals and I'm using the expensive SEM '70 wheel argent paint. the top centers are brushed stainless steel, the only metal part on it.

I'm also working on '67-'68 tags - I have the design mostly down, but need a couple real world examples to get MM measurements of the letters and spacing. I sent a test one out to someone for evaluation. these are tough though because of the row 1 and 2 small letter fonts.

Thanks Cody!
The only thing flat earthers fear, is sphere itself.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came .... now in 4spd flavor

www.eyecandi3d.com for Reproduction Fender Tags

Marty

 :yes:

ec_co

The only thing flat earthers fear, is sphere itself.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came .... now in 4spd flavor

www.eyecandi3d.com for Reproduction Fender Tags


ec_co

#3
Bump for the month.

It's show season and I'm itching to print. If you mention that you ordered because of e-bodies.org, not only will you get 2 of the standard size, but I'll print out a free jumbo size for you as well for easier show display.

If you ordered previously and did not get a jumbo, just cover shipping and I'll send you one.
The only thing flat earthers fear, is sphere itself.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came .... now in 4spd flavor

www.eyecandi3d.com for Reproduction Fender Tags

Romero14

They look great. I received mine and will be installing it on the car before paint.


Tags: