Main Menu

70 challenger firewall fasteners

Started by Mopar5, June 14, 2019, 07:38:22 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Mopar5

Anyone have a good source for new fasteners for mounting of the voltage regulator,coil, ballast resistor hopefully all in one kit?

Chryco Psycho


Mopar5



anlauto

If Dave doesn't have that, then R/T Specialities puts together kits. :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Mopar5


anlauto

The only things that mount to a 70 Challenger firewall would be the ballast resistor and voltage regulator. So you only need three of these bolts. Two more for the starter relay on the inner apron and one more for the ground wire on the rad support.
http://www.rtspecialties.net/proddetail.asp?prod=1000245
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Mopar5

Quote from: anlauto on June 15, 2019, 08:03:49 AM
The only things that mount to a 70 Challenger firewall would be the ballast resistor and voltage regulator. So you only need three of these bolts. Two more for the starter relay on the inner apron and one more for the ground wire on the rad support.
http://www.rtspecialties.net/proddetail.asp?prod=1000245
Thanks ,that makes it simple.