Custom Speedhut Gauges -Standard dash cluster

[HP_Cuda]

Good answer!

Might as well honk the horn too!!!

[Caniggia]

What is gauge diameter used? Speedo seems 4 1/2 and others  2 5/8

[Brads70]

What is gauge diameter used? Speedo seems 4 1/2 and others  2 5/8

Yup, 4 1/2" and 2 5/8"

[734406PK]

The dash looks awesome Brad! Nice job!!

[Mickm]

Nice looking job there Brad. I did something similar and have been pleased with the results.

Dilly Dilly,
Mickm

[7212Mopar]

Brad, looks very nice. Does it require new senders? How do you plug up the Speedo connection at the trans? Wiring for the light bar, brake light remains? How about a tutorial Write up?

[Caniggia]

Looks speedo is gps, no wiring to trans needed.

[Brads70]

Brad, looks very nice. Does it require new senders? How do you plug up the Speedo connection at the trans? Wiring for the light bar, brake light remains? How about a tutorial Write up?

The gauges all come with the required senders, fuel gauge requires a separate unit as I used Tanks Inc sending unit. ( No more leaks! ) They need to know what Ohm's unit you require .
http://www.tanksinc.com/index.cfm/page/ptype=product/product_id=276/mode=prod/prd276.htm
Speedo is GPS which is nice  as you can switch gear ratio, tires etc... and not worry about calibration. They also have there own lighting like a standard aftermarket gauge. Wiring harnesses are all plug and play, just need power and ground.

[Brads70]

You get to design what ever you can dream up, here are my final proofs Speedhut sent me before they produced them.

[Mickm]

I wired my Speedhut gauges up per their instruction then wired the original dash/gauge light bar in with their harness and put a small rocker switch under the gauges do I can have the dash/gauges lite either way.
Dilly Dilly,
Mickm