Gauge Light Bar

[340Challman]

Does anyone make the lenses and rivets on the light bar? I have looked and came up empty. Also, what sheen is on the black dash parts? Mine look more matte or flat. I thought they would be a satin finish. Thanks guys

[Hemi09]

I recently picked up a set on a site called Parts Hound.  The rivets also came with the lenses. 

[Hemi09]

Here is the link...

www.partshound.net

[R/T's 4 R/P]

Electrical section page 5...

[antonellomopar]

I have been working with Tommy for a long time, buying all kind of electrical stuff from him. Very good service and prompt service.

[340Challman]

I recently picked up a set on a site called Parts Hound.  The rivets also came with the lenses.

Excellent! A new source for parts. He has a lot of good stuff. Thanks much.

[Jay Bee]

Those are the wrong rivets, you need semi tubular rivets 1/8 x 3/16 or 1/8.

Some good info here..
https://forum.e-bodies.org/interior/6/dash-light-panel-questions/13988/msg189193#msg189193

[70/6chall]

340 Challman, if you are interested I restored these, for standard instrument dash, light bars. They are OE and are for a 70 only and 71-74 application. They are really clean no rust lenses and rivets are clean also. Let me know if you have an interest in them.  Thanks,   Al

[340Challman]

340 Challman, if you are interested I restored these, for standard instrument dash, light bars. They are OE and are for a 70 only and 71-74 application. They are really clean no rust lenses and rivets are clean also. Let me know if you have an interest in them.  Thanks,   Al

Man! What a drag. I would have been interested except mine is the rallye dash. Those look great. What did you finish the metal with? It looks to be more of a satin finish than mine. Then again, mine have 50 years of finish deterioration. 

[340Challman]

Those are the wrong rivets, you need semi tubular rivets 1/8 x 3/16 or 1/8.

Some good info here..
https://forum.e-bodies.org/interior/6/dash-light-panel-questions/13988/msg189193#msg189193

Thanks Jay Bee. I searched, but didn't find that thread. Good info.