RTX clock setting

[edison1970]

I finally installed the RTX gauges I purchased 2 years ago. I got everything working correctly except setting the time on the clock. I searched in the setup mode and didn't find a "clock" in the selections. Can someone that has this setup in their car help me out?

[Cuda Cody]

Should be in the manual, right?

https://www.dakotadigital.com/pdf/RTX_quick_start.pdf

Does this help...

Clock Setup (not visible with all LCD layouts)
o Small screens will not display a clock in the main speed screen
o The clock must be added to a Group Screen
▪ Small screens will only have two locations to display, Screen 1 and Screen 2
o When the LCD is showing a clock, tap the Switch (I) to move a small arrow next to the clock
o Hold Switch 1 (I) – > Release when prompted – > The hours will begin flashing
o Tapping Switch 1 (I) will decrease hours, while the Switch 2 (II) will increase hours
o When the correct hour is displayed – > Hold either switch to save – > Release when prompted
o The minutes will be flashing – > Tap (I) to decrease minutes – > Tap (II) to increase minutes
o Hold either switch to save – > Release when prompted

[edison1970]

Thanks for the reply. I'm slipping in my old age.  I missed it in the display section.