Main Menu

Shifter bolt size (same as grill)?

Started by Katfish, October 15, 2022, 06:00:44 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Katfish

70 Challenger,

Need a couple of the small bolts that hold down the shifter bezel.
They're smaller than 1/4" and look to be the same as the bolts used on the grill?
That have a captured oversized washer.

I see they sell bolt kits for the grill, but really don't want to spend $60 to get the 2 bolts needed.

So anyone know what size these are?

headejm


anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


Katfish


anlauto

Those look like 1/4-20, the ones you want are 10-24  :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Katfish

Thx, 10-24 makes sense, they are smaller than 1/4"

Any ideal where to buy these?

anlauto

I would say R/T Specialties if you could get a hold of them, they might have a shifter mounting kit ?
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


fc7cuda

A full service hardware store will have those, as long as you're not concerned with head markings.

69BFan

Take a look at AMK Products, they supply many of the restoration vendors and shops with hardware and fasteners.  There is a $30.00 minimum order, but it is not hard to reach that number.  Tom at RT should have them or as mentioned above, our Ace Hardware carries a good selection of hardware.

https://www.amkproducts.com/search-result/?ser=b-11850
www.restorationpartsandmaterials.com  Mopar weatherstripping is our specialty, but we offer a wide assortment of restoration products.

anlauto

Quote from: 69BFan on October 15, 2022, 08:32:46 PM
Take a look at AMK Products, they supply many of the restoration vendors and shops with hardware and fasteners.  There is a $30.00 minimum order, but it is not hard to reach that number.  Tom at RT should have them or as mentioned above, our Ace Hardware carries a good selection of hardware.

https://www.amkproducts.com/search-result/?ser=b-11850

:rofl: Tell me about it adding up quick...I just placed a $945 AMK order, and that's just a small handful of stuff  :'(
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Katfish

Quote from: 69BFan on October 15, 2022, 08:32:46 PM
Take a look at AMK Products, they supply many of the restoration vendors and shops with hardware and fasteners.  There is a $30.00 minimum order, but it is not hard to reach that number.  Tom at RT should have them or as mentioned above, our Ace Hardware carries a good selection of hardware.

https://www.amkproducts.com/search-result/?ser=b-11850

Thx! They have it
$29.75 for 25 of them, so I have to find something else for $0.25 and pay the $10 shipping for a total of $40 to get the couple bolts needed.
Not ideal, but it is what it is...........