Shifter bolt size (same as grill)?

[Katfish]

70 Challenger,

Need a couple of the small bolts that hold down the shifter bezel.
They're smaller than 1/4" and look to be the same as the bolts used on the grill?
That have a captured oversized washer.

I see they sell bolt kits for the grill, but really don't want to spend $60 to get the 2 bolts needed.

So anyone know what size these are?

[headejm]

Courtesy of MMC-Detroit.

[anlauto]

Courtesy of MMC-Detroit.

He's talking AUTOMATIC floor shifter 

[Katfish]

 They look like this

[anlauto]

Those look like 1/4-20, the ones you want are 10-24 

[Katfish]

Thx, 10-24 makes sense, they are smaller than 1/4"

Any ideal where to buy these?

[anlauto]

I would say R/T Specialties if you could get a hold of them, they might have a shifter mounting kit ?

[fc7cuda]

A full service hardware store will have those, as long as you're not concerned with head markings.

[69BFan]

Take a look at AMK Products, they supply many of the restoration vendors and shops with hardware and fasteners.  There is a $30.00 minimum order, but it is not hard to reach that number.  Tom at RT should have them or as mentioned above, our Ace Hardware carries a good selection of hardware.

https://www.amkproducts.com/search-result/?ser=b-11850

[anlauto]

Take a look at AMK Products, they supply many of the restoration vendors and shops with hardware and fasteners.  There is a $30.00 minimum order, but it is not hard to reach that number.  Tom at RT should have them or as mentioned above, our Ace Hardware carries a good selection of hardware.

https://www.amkproducts.com/search-result/?ser=b-11850

Tell me about it adding up quick...I just placed a $945 AMK order, and that's just a small handful of stuff 

[Katfish]

Take a look at AMK Products, they supply many of the restoration vendors and shops with hardware and fasteners.  There is a $30.00 minimum order, but it is not hard to reach that number.  Tom at RT should have them or as mentioned above, our Ace Hardware carries a good selection of hardware.

https://www.amkproducts.com/search-result/?ser=b-11850

Thx! They have it
$29.75 for 25 of them, so I have to find something else for $0.25 and pay the $10 shipping for a total of $40 to get the couple bolts needed.
Not ideal, but it is what it is...........