1972-74 E body Vapor Separator - reduced

[cudabin]

Came off a 1974 Cuda, but I believe it is the same for 1972 through 1974 E bodies. This part has been soaked in a rust wash solution and then a cleaning solvent to prevent gumming internally. There is still undercoat present on this unit and it has one of its mounting bolts/u-clips still intact. The internal check valve bearing moves freely both ways when a light vacuum or air pressure is applied to the outlet tube. There is approximately a 1/16 diameter hole just above the outlet as seen in the final pic. It will need to be plugged for proper operation (I covered this hole with my finger to test). $40 US plus ship from Ontario, Canada.

[cudabin]

bump