70 - 71 NOS Challenger n/plates SOLD

[716bbl]

Not like early factory issued pieces.
2 pins on the back instead of 3.
Probably made in the early 90's
From the front, everything looks correct
Price lowered to $ 25.00   SOLD
shipping included in the lower 48.

[716bbl]

They were the same as on my 70 Challenger, built on CO7.
That's why I picked them up, most of the times they are stick on, after a repaint or wreck.
I will save you two.
Send me your address?
Thanks

[1 Wild R/T]

Sorry, I don't know what those are but they aren't factory fender emblems.... OE has three pins....

[Cuda Cody]

Can you get a close up photo of the back part number?  Looks like the stamp might have changed?

[RUNCHARGER]

Those pins look thin. How long are the emblems?

[716bbl]

P.N. on the nameplates is:   3444-938

Looks like a vendor # might be 9420

[716bbl]

I will get a true measurement on length in the AM.
Sorry for the delay.

[Cuda Cody]

   They look to be different stamping based on the backs of them.

[MoparDave]

P.N. on the nameplates is:   3444-938

Looks like a vendor # might be 9420

it appears that those are repop from the mopar 3444938 emblem which is a sticky back. the pins were added to a mold as they are too thin. 3445224 Would be the fender emblem. and 3 pins.

[anlauto]

Could they be second generation Challenger ?

[Shane Kelley]

I have had these sitting on the shelf for a few years. I swear I pulled them out of Mopar packaging. But after examining the backs with part numbers they look repop. Nice quality but with the part numbers ground off it wreaks Repop. If anybody is interested in them. PM me.

[716bbl]

I just measured one and it is 7 1/8 " long.
Sorry for the confusion.
When I picked these up, they were supposed to be Original issue.
The mounting studs are thin compared to the pictures above.

[MoparDave]

Could they be second generation Challenger ?

for the later 78 79 maybe but doubt it. For the current LC no. as those are adhesive.

[MoparDave]

I have had these sitting on the shelf for a few years. I swear I pulled them out of Mopar packaging. But after examining the backs with part numbers they look repop. Nice quality but with the part numbers ground off it wreaks Repop. If anybody is interested in them. PM me.

these are the YO knock offs. with the VC #