70-71 cuda side marker patch

[Cuda70-74]

I know this is a odd request but I was just wondering if anybody has a really damaged fender or quarter panel and wants to just sell the side marker patch piece. I'll have a pic of what I'm looking and I only need 1 side.

[1 Wild R/T]

If I were doing the 72& up to 71 & down conversion I'd make a stamping die... No warpage from welding to deal with, there's plenty of metal & it's a pretty easy die to create....

[anlauto]

Pretty sure that the 70-71 stamping is narrower then the 72-74 lights 

PG Classics used to sell that part you need.

[Burdar]

If I was doing a custom 72-74 Cuda build, I'd just start out by putting 70-71 quarters and fenders on it.  Most cars need those replaced anyway.  The only issue might be mounting a 72-74 grill into a 70-71 fender.  (If I was doing a custom 72-74 Challenger, I'd do the same thing)

[1 Wild R/T]

Pretty sure that the 70-71 stamping is narrower then the 72-74 lights 

PG Classics used to sell that part you need.

Yeah, but the light sits flat on the panel, pretty sure the cut out hole is smaller.. 

[Cuda70-74]

Thanks for all the input. I'm probably going to do what 1 Wild R/T said make my own once the patch in my first post is delivered.

[anlauto]

Pretty sure that the 70-71 stamping is narrower then the 72-74 lights 

PG Classics used to sell that part you need.

Yeah, but the light sits flat on the panel, pretty sure the cut out hole is smaller..

No they don't. The plastic reflector is counter sunk in the panel just like the 70-71's and I believe that area is wider than the 70-71's

[1 Wild R/T]

Pretty sure that the 70-71 stamping is narrower then the 72-74 lights 

PG Classics used to sell that part you need.

Yeah, but the light sits flat on the panel, pretty sure the cut out hole is smaller..

No they don't. The plastic reflector is counter sunk in the panel just like the 70-71's and I believe that area is wider than the 70-71's

Well that surprised me... I knew I'd seen a marker removed from a flat panel.... Looks like Dusters are flat.....

[anlauto]

Oh, I apologise, I thought we were talking about E Bodies....my bad

[1 Wild R/T]

Oh, I apologise, I thought we were talking about E Bodies....my bad

We are....

72-74's which I'm happy to say I've never owned... And obviously lots of folks who do own them would prefer to own the earlier version of, or we wouldn't have this post...

[RUNCHARGER]

I cut a two of those out of my HemiCuda. I'll see if I can find them tomorrow.

[Cuda70-74]

I cut a two of those out of my HemiCuda. I'll see if I can find them tomorrow.

ok cool thanks

[anlauto]

Ohhhh...Beware...If they're from a "hemi" car they cost more

[Cuda70-74]

Ohhhh...Beware...If they're from a "hemi" car they cost more

The famous pitch line  alot of sellers use

[RUNCHARGER]

Sorry: I chucked them out in last years purge. They were in my scrap metal bits box but I guess I finally chucked them.