71-74 Challenger molding

[Rdchallenger]

Looking for a set of 71-74 Challenger drip rail moldings for Driver and Passenger side as well as trunk and quarter trim moldings. Driver condition, I am more than happy to sand and polish them during these winter months but please no dents.

Any help would be greatly appreciated, not looking to spend a fortune on repops.

[Rdchallenger]

Bit the bullet on the trunk molding. Hoping someone has some drip rail molding they're willing to part with as mine is way too bent for my skill level. The other side isn't too bad, upon further inspection... Question is what side do I have? Do the two pieces slide and attach near the front or rear of the roof?

[jimynick]

I'm guessing the drip mldgs are off the car? It's pretty easy to hold them up to the roof and you'll soon see whether they look right for a particular side or not. You mention that the other one is "twisted", if that's all it is you should be able to "un"twist it, but if it'd bent to a kink, that's another story. Good luck with the search; if I had some, I'd give them to you, but no such luck. 

[Rdchallenger]

I'm guessing the drip mldgs are off the car? It's pretty easy to hold them up to the roof and you'll soon see whether they look right for a particular side or not. You mention that the other one is "twisted", if that's all it is you should be able to "un"twist it, but if it'd bent to a kink, that's another story. Good luck with the search; if I had some, I'd give them to you, but no such luck. 

I would but the moldings and the car are currently at two different locations 😂. Yeah looks like when the one side was taken off (not by me) the person looked to have tried to pry it off without all the screws being out and just made a complete mess of it 
If nothing else, I'll end up taking the good side up to the car this weekend then be on the lookout on eBay or Tony's for the other side.

[71340RT]

I will take a look as I know I have a extra set of these.

[71340RT]

Here is a picture of both sets of molding that I have. Top pair is for the bottom that the window seal sets in and the bottom pair are the upper next to the roof. Let me know what you need?

[Rdchallenger]

PM Sent, Jeff.
It's for the bottom pair.
Thanks for checking!