Clutch Safety Switch

[anlauto]

Looking for a clutch pedal safety switch, any year E Body as long as it's working condition...and you're willing to ship to Canada.
PM me if you can help out...

[usraptor]

Roseville?

[anlauto]

They're not reproduced unfortunately 

[YYZ]

If it's for the resto-mod, why not use one of the universal switches from Napa or others?  It would be pretty easy to fabricate a bracket.

Aspen/Volare switch could be modded to work (and are a lot more common/less expensive)

Or a new reproduction early 1970s GM switch (Corvette etc.) is less than $100 and again has a similar-ish appearance.

Lastly, if you're using a hydraulic clutch, some clutch master cylinders have provisions for a safety switch.

[anlauto]

If it's for the resto-mod, why not use one of the universal switches from Napa or others?  It would be pretty easy to fabricate a bracket.

Aspen/Volare switch could be modded to work (and are a lot more common/less expensive)

Or a new reproduction early 1970s GM switch (Corvette etc.) is less than $100 and again has a similar-ish appearance.

Lastly, if you're using a hydraulic clutch, some clutch master cylinders have provisions for a safety switch.

Thanks for the suggestions Vlad
I need the switch for the 426 Hemi Clone I'm building unfortunately ....

For the resto-mods, the Tremec has a neutral safety switch that gets wired directly to the 392's computer.....pretty slick....only starts when in neutral   

[mopar jack]

Brewers shows a rebuilt switch but requires a core.
http://www.brewersperformance.com/products.php?cat=125

[anlauto]

Brewers shows a rebuilt switch but requires a core.
http://www.brewersperformance.com/products.php?cat=125

Yup, and now the guy rebuilding them for Brewers has retired 

[anlauto]

Still looking