Correct P/S return hose

[Topcat]

Need about 6" is all.

Rick is  out it appears.

https://www.ebay.com/itm/NOS-MOPAR-Power-Steering-RETURN-HOSE-Plymouth-Dodge-Chrys-67-79-383-440-318-340-/223195174933?_trksid=p2047675.m43663.l44720&nordt=true&rt=nc&orig_cvip=true

For a Federal cooler

I don't want that repro garbage that swells up then leaks all over your engine when it falls off. 

[tman]

Stick with 11/32 hose.  3/8 is a hair big.  I bought Gates hose from RockAuto several years ago.  And yes, the Repro type swell up and just pop off the fitting leaving a big mess to clean up.

[Topcat]

Stick with 11/32 hose.  3/8 is a hair big.  I bought Gates hose from RockAuto several years ago.  And yes, the Repro type swell up and just pop off the fitting leaving a big mess to clean up.

Gotta scroll down further on the ad and it shows the right one.     



Mopar NOS
Power Steering
Return Hose Kit

Correct 11/32" diameter

Power steering return hose for 1967-79 A, B, C, and E-body Mopars. Correct 11/32" diameter - not 5/16! not 3/8" Not "fuel line", NOS Mopar hose constructed to not swell under the rigors of hot hydraulic fluid. 14" length is enough for all muscle-era Mopars, even when equipped with a cooler. 2 correct red clamps included. 100% Made in USA.