Door window up stop brackets.

[Rdchallenger]

Needed!!!! Upstop brackets for both doors. While searching through parts I noticed that the up stop brackets are nowhere to be found and doesn't looked like they're repopped that I know of.

Would also accept the dimensions on it to try and fabricate my own.

[1970Cuda]

The up-stops are definitely reproduced. I know The Mopar Shop used to have them, but I don't see them listed on the site now, but you might call Ed to see if he still has a set.

And I know he had the rubber for them, because I had mine media blasted, zinc plated and then just installed new rubber. (Also, I found them by looking on Moparts board.). You'll find a set.

[Rdchallenger]

Unfortunately I'm still on the search for these. Ed I don't believe was able to find any spares.

[B5fourspeed]

There is 2 on Ebay right now.

[Rdchallenger]

There is 2 on Ebay right now.

You didn't happen to catch the link to the auction did you?

[B5fourspeed]

Type in:Cuda glass stop.

[Rdchallenger]

Type in:Cuda glass stop.

I believe these are the ones you were talking about, for some reason they kept showing up on a google search for quite a while now but when you click the link it takes you to this page.

[anlauto]

Sylvain always has them... https://www.ebay.ca/itm/203967382280?hash=item2f7d674308:g:GQ4AAOSwReBhv2yX

[Rdchallenger]

Here's a dumb question regarding this part. We're they only a 70-71 e body part? I have two different year doors my passenger side one is a '73 original to the car. And the driver side is a '70 that I found in great condition.
As you see on the doors, one has a spot for the bracket, the other doesn't. Damn you mother Ma

[anlauto]

In 1973-74 the upstops were on the inside of the glass, opposite of the 70-71 which were on the outside of the glass and of course they use a different style of upstop