Main Menu

Looking for a Ground Wire For A 70 CUDA

Started by Convertcuda, May 31, 2018, 07:46:55 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Convertcuda

Thanks Alan, but I need for an OE car.

Ken

screamindriver

There was a TSB addressing the need for that ground strap so some were installed by the dealer...The strap length is 16 inches long..

Jim AAR

Quote from: Convertcuda on June 01, 2018, 04:25:07 AM
Here's the picture.

My AAR built in March 1970 did NOT have this ground wire on either the Passenger or Driver's side and both my Rear Marker lights work fine with the foam gaskets in place, the ground would come from the inner bracket that holds it to the fender (the nut bolts to the Bracket and the Bracket touches the Inner Quarter, thus grounded), mine had undercoating overspray on the bracket itself meaning that the marker light was installed prior to the undercoating being applied. I know this because my rear Marker lights had never been removed when I bought the car in 1979.

BTW your picture is for the Driver's Side.