Main Menu

Rallye Guage Cluster

Started by Spikedog08, August 24, 2017, 09:05:42 AM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Spikedog08

I am looking to replace the standard cluster in my convertible to a rallye cluster.  Would like a decent set that can be installed with little work.  I will also need the bezel and can put a new wood cover on it if necessary.  Will also need the pod cluster but of course with a convertible, will need 4 holes for the top switch.  Please let me know what you have! 

Spikedog   :wave:
Drive it like you stole it . . . And they're CHASING you!

JS29

You will also need the light bar, 4 bulb verses 3 bulb. and the heater control panel is different, cutout for the speedometer.

erik70rt

You will also need a new wiring harness unless you want to cut and splice quite a bit.
Contrary to the opinions of some, I am not dumber than I look.


Spikedog08

Quote from: erik70rt on August 24, 2017, 12:51:23 PM
You will also need a new wiring harness unless you want to cut and splice quite a bit.

Quote from: JS29 on August 24, 2017, 11:23:19 AM
You will also need the light bar, 4 bulb verses 3 bulb. and the heater control panel is different, cutout for the speedometer.

Thanks guys!  Those parts I have already!   :clapping:
Drive it like you stole it . . . And they're CHASING you!

1 Wild R/T

four switch pod doesn't matter since you'll want to buy new wood grained appliqué anyway... All the three & four switch panels use the same parts behind the appliqué

http://www.performancecargraphics.com/Dash_Stuff/Woodgrain/E-body_Rallye_Wood_Plates_Short.htm

If you want the correct parts you'll want the remote set type gauges but PCG offers convertible woodgrain for the 72-74 style gauges if thats what you find & your not particular...

76orangewagon

I will be removing this one in a month or so... everything works but I will need the actual switches for my non Rallye conversion.

Spikedog08

That is exactly what I am looking for . .  Please PM me and hopefully we can make a deal!   :banana:
As for the switches . . . I have all new switches from Slotts already so no worries! 
Drive it like you stole it . . . And they're CHASING you!


1 Wild R/T

That will work, not a 70-71 style but with woodgrain plates from PCG for direct set gauges with power top....

Spikedog08

I assume the power top has it's own harness and is not included with the rallye gauge harness?  And I thought the 70-71 had the 8 grand tact?
Drive it like you stole it . . . And they're CHASING you!

1 Wild R/T

Convertible top harness is separate....

Tach can be used in any year cluster, they interchange..

70-71 cluster first   72-74 cluster second... look at the rest knobs