Main Menu

Bellhousing identification.

Started by Roadman, October 13, 2017, 09:18:44 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Roadman

   While I've been looking around for a bellhousing for @torredcuda  I tripped over this casting # chart From Roseville.     Good info.   http://www.rosevillemoparts.com/reference_castingnumbers5.php

Roadman

    So according to the chart, for a 73 Bbody 400, 4 speed either a 2892511 or 2892513 would work. Am i correct in assuming the difference is the front bearing retainer diameter. ?

Cuda Cody

The 513 is a common big block bell.  I've got a few around here that I can check if needed.  Not sure on the 511 bearing diameter. 


anlauto

Same bellhousing 511 is the part number 513 is the casting number  :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

torredcuda

Quote from: Roadman on October 13, 2017, 09:18:44 AM
   While I've been looking around for a bellhousing for @torredcuda  I tripped over this casting # chart From Roseville.     Good info.   http://www.rosevillemoparts.com/reference_castingnumbers5.php

Ya, saw that also and wasn`t sure if there was a difference  or not.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/