Main Menu

Getting the power to the ground

Started by Chryco Psycho, January 10, 2017, 08:38:41 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

chargerdon

Quote from: Chryco Psycho on July 04, 2021, 10:59:23 AM
lowering the front end at the engine mounts will help also , aftermarket engine mounts can be thicker than stock also  you may be able to oval some of the bolt holes to get the mounts to sit lower .

Oval some of the bolt holes??   Dont know how to do this...   

HP2

Drill them out larger or use a die grinder to oval them.