veryhot_post in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes Author Topic: 1970 E Body Stamping Question  (Read 2851 times)

Offline 6bblgt

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Las Vegas, NV
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1683
  • Credits: 7000
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #30 on: May 11, 2018, 12:35:56 PM »
What do you mean "#8 of 20 interiors"  Was there 20 different interior combinations ? :clueless:

crazy  :crazytalk:

black vinyl bucket H6X9 ~ 61.7%
white vinyl bucket w/black dash H6XW ~ 9.5%
green vinyl bucket H6F8 ~ 5.8%
blue vinyl bucket H6B5 ~ 5.5%
black vinyl bench H4X9 ~ 4.8%
black leather bucket PRX9 ~ 3.3%
red vinyl bucket H6E4 ~ 3.2%
tan vinyl bucket H6T5 ~ 2.2%
tan leather bucket PRT5 ~ 1.1%
white vinyl bench w/black dash H4XW ~ 0.9%
green vinyl bench H4F8 ~ 0.8%
blue vinyl bench H4B5 ~ 0.7%
white leather bucket w/black dash PRXW ~ 0.6%
white vinyl bucket w/blue dash H6BW ~ 0.4%
white vinyl bucket w/red dash H6EW ~ 0.2%
white vinyl bucket w/green dash H6FW ~ 0.2%
black vinyl w/houndstooth insert bucket P5X9 ~ 0.1%
white vinyl bench w/blue dash H4BW < 0.1%
white vinyl bench w/green dash H4FW < 0.1%
white leather bucket w/blue dash PRXW < 0.1%
white leather bucket w/red dash PRXW < 0.1%
white leather bucket w/green dash PRXW < 0.1%

the above 22 interiors add up to 101+% -  :unbelievable: - ERROR based on adding ~20 rounded numbers


« Last Edit: May 11, 2018, 01:16:10 PM by 6bblgt »
211-250318130150 in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes

Offline 6bblgt

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Las Vegas, NV
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1683
  • Credits: 7000
    • Share Post
clip in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #31 on: May 11, 2018, 12:47:45 PM »
& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

Online anlauto

  • Trade Count: (6)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 7503
  • Credits: 19430
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #32 on: May 11, 2018, 12:51:45 PM »
& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

That would be sweet if he was to restore it with those back on it.....few people in the world would.  :drooling:

Is there any available vinyl trim that's similar ?  :thinking:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

E-Bodies Cuda Challenger Message Forum

xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #32 on: May 11, 2018, 12:51:45 PM »

Offline 6bblgt

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Las Vegas, NV
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1683
  • Credits: 7000
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #33 on: May 11, 2018, 01:21:48 PM »
Performance Car Graphics offers the pinstripes http://www.performancecargraphics.com/Stripes_Lettering/Barracuda/70_Mid_Pinstripe.htm

& I've seen a couple restored cars with the mouldings, there must be something "close' - there was a restored EB5 340 'cuda w/added SHAKER in CA that ended up at RK Motors that had the mouldings/stripes - I think I have pics  :thinking:

Offline pbajeff

  • Trade Count: (0)
  • Leaning Tower of Power
  • *
  • Location: pampa, texas
  • Posts: 35
  • Credits: 280
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #34 on: May 11, 2018, 03:44:18 PM »
I have been trying to find a pic of a full car with that to see what it looked like - but no luck so far.

If you have one I would like to see that.

And I am assuming those numbers you listed are for all 70 cudas, not just V code,  correct?

Offline 750-h2

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Sudbury Ontario
  • Posts: 638
  • Credits: 4970
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #35 on: May 11, 2018, 04:53:52 PM »
What do you mean "#8 of 20 interiors"  Was there 20 different interior combinations ? :clueless:

crazy  :crazytalk:

black vinyl bucket H6X9 ~ 61.7%
white vinyl bucket w/black dash H6XW ~ 9.5%
green vinyl bucket H6F8 ~ 5.8%
blue vinyl bucket H6B5 ~ 5.5%
black vinyl bench H4X9 ~ 4.8%
black leather bucket PRX9 ~ 3.3%
red vinyl bucket H6E4 ~ 3.2%
tan vinyl bucket H6T5 ~ 2.2%
tan leather bucket PRT5 ~ 1.1%
white vinyl bench w/black dash H4XW ~ 0.9%
green vinyl bench H4F8 ~ 0.8%
blue vinyl bench H4B5 ~ 0.7%
white leather bucket w/black dash PRXW ~ 0.6%
white vinyl bucket w/blue dash H6BW ~ 0.4%
white vinyl bucket w/red dash H6EW ~ 0.2%
white vinyl bucket w/green dash H6FW ~ 0.2%
black vinyl w/houndstooth insert bucket P5X9 ~ 0.1%
white vinyl bench w/blue dash H4BW < 0.1%
white vinyl bench w/green dash H4FW < 0.1%
white leather bucket w/blue dash PRXW < 0.1%
white leather bucket w/red dash PRXW < 0.1%
white leather bucket w/green dash PRXW < 0.1%

the above 22 interiors add up to 101+% -  :unbelievable: - ERROR based on adding ~20 rounded numbers
How about the coloured vinyl/cloth seats?

Online anlauto

  • Trade Count: (6)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 7503
  • Credits: 19430
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #36 on: May 11, 2018, 05:04:31 PM »
I think Dan's list is only for 1970 Barracuda/Cuda ....and I'm not certain but I think you could only get black/white houndstooth  :thinking:

E-Bodies Cuda Challenger Message Forum

xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #36 on: May 11, 2018, 05:04:31 PM »

Offline 6bblgt

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Las Vegas, NV
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1683
  • Credits: 7000
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #37 on: May 11, 2018, 11:14:02 PM »
And I am assuming those numbers you listed are for all 70 cudas, not just V code,  correct?

yes, the numbers are all '70 'cudas (BS23) ONLY

the only combinations that were tracked were: engine/transmission/axle

Offline 6bblgt

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Las Vegas, NV
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1683
  • Credits: 7000
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #38 on: May 11, 2018, 11:28:13 PM »
I think Dan's list is only for 1970 Barracuda/Cuda ....and I'm not certain but I think you could only get black/white houndstooth  :thinking:

the list is 'cuda hardtop only (BS23)

the P5X9 black vinyl & cloth black/white houndstooth insert w/red piping (Gran Coupe) interior was added mid-year to the 'cuda, if the P5K4 burnt orange vinyl & cloth black/burnt orange insert (Gran Coupe) interior was also available in a 'cuda - it would fall into the < 0.1% category (<9 cars).

Offline cuda hunter

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: salida colorado
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1305
  • Credits: 3210
    • Share Post
    • Sims Custom Homes
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #39 on: May 17, 2018, 04:59:14 PM »
& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

I really like those V5R mouldings.  I've been looking for a set to purchase forever.  Probably won't find a set, but I'm always looking. 

"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline challenger6pak

  • Trade Count: (0)
  • Leaning Tower of Power
  • *
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 111
  • Credits: 1030
    • Share Post
clip in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #40 on: May 20, 2018, 09:03:14 PM »
& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

I really like those V5R mouldings.  I've been looking for a set to purchase forever.  Probably won't find a set, but I'm always looking.

Are the V5R mouldings the same as the inserts in the body protection mouldings?

E-Bodies Cuda Challenger Message Forum

clip in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #40 on: May 20, 2018, 09:03:14 PM »

Offline 6bblgt

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Las Vegas, NV
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 1683
  • Credits: 7000
    • Share Post
clip in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #41 on: May 20, 2018, 10:20:56 PM »
I'd bet the insert from the Challenger V5_ moulding is too narrow ( @challenger6pak can you measure it?)

IIRC the '70 Barracuda moulding is ~1/2" + the pinstripes for ~1" wide
here's a piece of '71 Barracuda & others V5X it's ~5/8"


Offline challenger6pak

  • Trade Count: (0)
  • Leaning Tower of Power
  • *
  • index in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
  • Posts: 111
  • Credits: 1030
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #42 on: May 25, 2018, 06:22:33 PM »
The insert is around 5/8.

Offline xx88man

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Chilliwack, BC
  • Posts: 524
  • Credits: 4690
    • Share Post
xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #43 on: August 16, 2018, 03:58:25 PM »
I think Dan's list is only for 1970 Barracuda/Cuda ....and I'm not certain but I think you could only get black/white houndstooth  :thinking:

I know this is an old thread but...how much different were the '70 Challengers? I had one that had a blue houndstooth interior. I assume the Barracudas didn't have that option?
Keep yer foot in it

E-Bodies Cuda Challenger Message Forum

xx in 1970 E Body Stamping Question in VIN, Fender Tag, Build Sheet & Date Codes
Re: 1970 E Body Stamping Question
« Reply #43 on: August 16, 2018, 03:58:25 PM »

Tags:

Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter Share via whatsapp

clip
stamping and Date Codes on rims

Started by MoparDave

5 Replies
885 Views
Last post May 02, 2017, 08:16:57 PM
by fc7cuda
xx
Body number question/ missing vin tag

Started by RV2

19 Replies
1350 Views
Last post May 11, 2018, 11:05:24 AM
by 6bblgt
xx
General body shop question

Started by mjb765

18 Replies
688 Views
Last post October 10, 2018, 05:39:45 PM
by 73440
clip
Straighten panels - Body work question

Started by soundcontrol

25 Replies
1060 Views
Last post March 16, 2017, 08:15:01 PM
by jimynick
xx
E Body Dana 60 E Brake cable question....

Started by anlauto

8 Replies
540 Views
Last post July 10, 2017, 07:24:11 PM
by anlauto