Need help finding photos of 4 digit Date codes...

[Cuda Cody]

Looking for good crisp easy to read photos of Julian Perpetual Day Calendar codes on E-Body parts.  Items that I can think of that use the 4 digit code: K-Frame, Seat Tags, Master Cylinder, Power Steering, Wiper Motor, Holley Carb, Carter Carb ID tag, AC Dryer, Hoses, Radiator Support Bracket, Hood Catch , Hood Latch, Emergency Brake, Radio, Fuel Relay, Radio Crossover, Speedo, and Tachs.

Anyone think of any other parts that use this date code system?

I need photos examples for our new Date Code Calendar area of our site so they need to be free of watermarks and have permission to use them. 

https://www.e-bodies.org/resources/mopar-chrysler-10000-day-calendar-date-code/julian-perpetual-chart-decoder/

Thank you!!!!   

[cuda dad]

128 day of 1970 rear speaker(s) R31 option.  SPD 710.

[cuda dad]

Radiator 81st day of 1970

[cuda dad]

my new favorite carb 51st day of 1970

[Jay Bee]

Does the size/resolution matter?

[Jay Bee]

The right side dimmer was stamped poorly and the hood safety catch might be TOO closeup. Use or don't use, totally your choice.

[Cuda Cody]

Great photos.  I'll get them added to the site.   

[cuda dad]

I thought this was interesting, Maltese cross on the front of my TA Block.

[Cuda Cody]

I thought this was interesting, Maltese cross on the front of my TA Block.

Maltese cross = .001″ Undersized Crankshaft Journals (Oversized Bearings)

https://www.e-bodies.org/resources/mopar-chrysler-10000-day-calendar-date-code/

Decoding Additional Symbols & Stampings:
A = .020″ Oversized Cylinder Bore
B = .010″ Undersized Main & Rod Bearings  (Oversized Bearings)
C = Special Crankshaft & Pistons
E = Cast Crankshaft
H = Standard 4 Barrel Carb
HP = High Performance
LC = Low Compression
OS = .005″ Oversized Valve Stems
P = Premium Fuel Recommended
S = Service Engine (found on Warranty Blocks)
sP = Special Engine use Premium Fuel (found on T/A 340 Engines)
WT or TW = Water Tested (normally found on Hemi's & Warranty Blocks)
X = Oversized Valve Guides
2 = Second Shift
♦ = .008″ Oversized Tappets
✠ = .001″ Undersized Crankshaft Journals (Oversized Bearings)
✠+X = .010″ Undersized Crankshaft Journals

[7E-Bodies]

@Cuda Cody if you're still after some of these, I may have quite the source. I just sent you a note. Let me know. My car was stored thirty years and has most original items in clean condition.

[cuda hunter]

pretty small outing  so far. 

I was hoping to find the pictures of the date on the K-frame from this post. 
I'll look for the date code calendar.

bump for more pictures.....

[cuda hunter]

found it.  https://www.e-bodies.org/resources/mopar-chrysler-10000-day-calendar-date-code/julian-perpetual-chart-decoder/

no K-frame location picture

[Cuda Cody]

The dates are normally found near or right where the Coin is so that might be covering the date on some k frames.  I've also seen them without a date too.