Main Menu

CONFIRMATION ABOUT BRAKE CALIPER / CUDA 1970

Started by THE ZUKE, November 17, 2018, 02:13:01 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

73chalngr

Any idea how old the rubber brake hoses are ? As they get older they can deteriorate on the inside and cause a blockage but this usually causes a sticking on problem not sure if it would cause a weakness problem but if it stops fluid from moving I would think it could cause a slow reaction .

Chryco Psycho

This is also another good possibility , seen it a few times

THE ZUKE

Quote from: 73chalngr on November 19, 2018, 02:05:49 PM
Any idea how old the rubber brake hoses are ? As they get older they can deteriorate on the inside and cause a blockage but this usually causes a sticking on problem not sure if it would cause a weakness problem but if it stops fluid from moving I would think it could cause a slow reaction .

No, I do not know the year of flexible.
I have this cuda in my garage for 1 month 1/2. lol
With a number of problems to settle gradually.


THE ZUKE


THE ZUKE

Thank you guys for your advice. ;)

The problem of imbalance on my front brakes is set. :bigthumb:

A simple purge of the circuit has re-balanced the braking power of the 2 calipers. :lookatthat:

73chalngr

That is good news. Thank you for posting how you solved the problem.

THE ZUKE

Quote from: 73chalngr on November 25, 2018, 08:06:55 AM
That is good news. Thank you for posting how you solved the problem.

You're welcome  :bigthumb: