CONFIRMATION ABOUT BRAKE CALIPER / CUDA 1970

[73chalngr]

Any idea how old the rubber brake hoses are ? As they get older they can deteriorate on the inside and cause a blockage but this usually causes a sticking on problem not sure if it would cause a weakness problem but if it stops fluid from moving I would think it could cause a slow reaction .

[Chryco Psycho]

This is also another good possibility , seen it a few times

[THE ZUKE]

Any idea how old the rubber brake hoses are ? As they get older they can deteriorate on the inside and cause a blockage but this usually causes a sticking on problem not sure if it would cause a weakness problem but if it stops fluid from moving I would think it could cause a slow reaction .

No, I do not know the year of flexible.
I have this cuda in my garage for 1 month 1/2. lol
With a number of problems to settle gradually.

[THE ZUKE]

This is also another good possibility , seen it a few times

Absolutly 

[THE ZUKE]

Thank you guys for your advice.

The problem of imbalance on my front brakes is set.

A simple purge of the circuit has re-balanced the braking power of the 2 calipers.

[73chalngr]

That is good news. Thank you for posting how you solved the problem.

[THE ZUKE]

That is good news. Thank you for posting how you solved the problem.

You're welcome