Correct spacer saver bottle mounting

[scf100]

Just bought a bottle and bracket both reproduction

This is how I mounted it in my Challenger but does not look right......is this shaft I am pointing at right?....the bracket does not slide down it unless I drill hole larger

[anlauto]

That spacer is not supposed to be there. Is it because you've run out of threads ?

[fc7cuda]

I believe you need to change to the shorter SS rod, or your SS wheel is too shallow.

[71vert340]

 Here's my space saver spare. No spacer. Threaded rod appears shorter than yours.
Terry W.

[headejm]

  Also, on my 1970 Challenger the wingnut is silver chrome not black. Not sure I've ever seen a black wingnut. 

[6bblgt]

  with the above & it appears your wheel is a Ford unit - '69 & '70 Boss Mustangs used the same spare tire

[scf100]

Here's my space saver spare. No spacer. Threaded rod appears shorter than yours.
Terry W.

Ok so maybe I have a wrong ss tire but........is there a mounting bracket on the bottom that the tire rests on?

[anlauto]

The tire rests on the hook like in Terry's pictures above.

[scf100]

with the above & it appears your wheel is a Ford unit - '69 & '70 Boss Mustangs used the same spare tire

I pulled it out and yes it's from a Ford looks like 1977 Midsize car good eye!

It's a D78-14 tire

[scf100]

So forgive me I ve never had a mopar with a space saver

So what is the gray part below tire I circled?
I do not have that............is it the jack hook?

[anlauto]

Yes, that is the jack hook. Does your car have the jack instruction decal on the trunk lid? That pretty much answers all your questions so far ?

[scf100]

I'll check it out


Thanks you guys