Main Menu

Firewall Bracket - Manual vs Power Brakes

Started by erik70rt, August 20, 2019, 08:00:08 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

erik70rt

What is the difference of the bracket on the firewall between manual and power brakes.  I currently have manual drums and want to convert to a factory power disc brake setup.  Do I need to change the bracket on the firewall?

Thanks!
Contrary to the opinions of some, I am not dumber than I look.

JS29


GoodysGotaCuda

Do you have a picture of the power brake one?


Sent from my iPhone using Tapatalk
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs


anlauto

Yes, you'll need to switch the firewall bracket as well.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

erik70rt

Quote from: anlauto on August 20, 2019, 08:56:15 AM
Yes, you'll need to switch the firewall bracket as well.

I take it nobody repops those. 
Contrary to the opinions of some, I am not dumber than I look.

Shane Kelley

This is a power brake one from a 70 in top pic.
Lower is manual. Only pic I have of that style. 

anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


dave73

If you go to hydroboost brakes I believe hydratech sells an ebody firewall bracket? Not sure what the cost difference would be from converting to stock power brakes vs. hydroboost?

HP_Cuda


I know where I got mine.

You might want to call a guy at Roseville....
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200