Where to get factory style brake line fittings?

[torredcuda]

I`ve found them before but been a while so can`t remember where, parts and hardware stores sometimes don`t have the correct sizes for tubing, thread and hex size. Where do you guys get them, would like local parts/hardware store but online is OK.

[Chryco Psycho]

I have use generic steel tube nuts for 3/16 tube , generally available at most parts stores

[Rich G.]

The odd ball fittings you can get from The Right Stuff or In-line Tube. Don't think the local parts store would have them.

[RUNCHARGER]

If you know what you need for brake line fittings they can be found using the net, then take the part #'s into a store with a good stock of them. I look for them often when guys put modern M/C's in old cars. Weatherhead is one source.

[jimynick]

If you know what you need for brake line fittings they can be found using the net, then take the part #'s into a store with a good stock of them. I look for them often when guys put modern M/C's in old cars. Weatherhead is one source.

  What the man said. Weatherhead was and still is also the source for virtually any brass fitting you may ever need, and have been for ages. Good luck!