11 years and counting!

[Swamp Donkey]

This definitely gives me something to think about.  Off to do some research on the A41 transmission. I am wanting either a NAG1 or 8HP90. Even considering a 4L80e 

Still not opposed to a tremec 5 or 6 speed

[Hemi1632]

@Swamp Donkey here you go....

https://shiftsst.com/mopar?gclid=EAIaIQobChMIu9me5r2r5AIVyZ-zCh1zoghCEAAYASADEgKywfD_BwE

[Hemi1632]

Here are a couple more pictures. We went with Hotwire for the CPU and all the wiring (including cruise control) Put an access door in the trunk so I could get to the fuel pump if need be. Heater box and AC all redone.

[Brads70]

Looking good ! I also have the A41 kit , its been in the car quite a few years now with no issues!

That is great to hear. I plan on driving the car and taking road trips with it. What gear do you have in your car with the A41? And what does it spin at 60 mph?

I had 3:55 in the Dana but found I was driving faster than law enforcement liked. So I installed 4:10. I found my engine combo didn't like at or below 2000 RPM sort of felt like it was lugging( 65 MPH). So with the 4:10's it's now about 2300 RPM's which is perfect for my combo. Great around town too!

[Hemi1632]

[/quote]
I had 3:55 in the Dana but found I was driving faster than law enforcement liked. So I installed 4:10. I found my engine combo didn't like at or below 2000 RPM sort of felt like it was lugging( 65 MPH). So with the 4:10's it's now about 2300 RPM's which is perfect for my combo. Great around town too!
[/quote]

At or below 2000? Wow! How is traction with the 4.10? What do you have for shoes under her? What motor are you running? HP? TQ?

I think around 2000 with an almost stock 5.7 (headers & CAI) will be great? I plan on taking it on long trips. Like Woodward, Carlisle, and then taking it down Rt. 66 from start to finish, Chicago to LA!

[Brads70]

3:55 might be the ticket for you, especially with FI . I wouldn't go any lower numerically though. Mine is a 451 stroker engine, hyd roller cam , etc.... traction is fine using Azenis Falkin 615K tires though.

[Hemi1632]

@Brads70 no wonder you were attracting attention from law enforcement! I keep kicking around putting a Pro Charger on the 5.7, but I need to leave this thing alone and drive it! Or I may never get it finished! LOL

[Hemi1632]

Subframe and core support are in!

[Hemi1632]

Here is the shifter you can get with the A41, 3" exhaust and drive shaft installed.

[Hemi1632]

Fuel lines and regulator.

[Hemi1632]

The joys of wiring......

[Swamp Donkey]

I like it.   Nice work

[Hemi1632]

I like it.   Nice work

Thank you very much, it is starting to come around!

[Hemi1632]

Radiator, trans cooler and AC has been run.....

[Hemi1632]

New brakes...