1971 Cuda Hellcat - Chiquita

Convertcuda · December 11, 2018, 04:03:30 PM

Looking nice!!!!!!!!!!!!! What type of exhaust pipes are you putting on the car?

Thanks Ken

71Cuda · December 11, 2018, 04:57:35 PM

3 inch TTI system

Sent from my iPhone using Tapatalk Pro

71Cuda · December 15, 2018, 04:10:49 PM

Hall effect setup. This provides the speed sensor input to the ecu.

Sent from my iPhone using Tapatalk Pro

69CudaFan · December 18, 2018, 08:21:18 PM

John, you are doing stuff that is groundbreaking. This thread is good, and I know that you are keeping track of the cubic dollars needed to pull off something amazing.

Now we just need to find you a Hellephant candidate...

71Cuda · December 18, 2018, 08:45:11 PM

Some pipes. TTI 3" setup

Sent from my iPhone using Tapatalk Pro

YellowThumper · December 18, 2018, 09:41:53 PM

Really enjoy seeing this come together

71Cuda · December 19, 2018, 05:39:08 PM

The kit so far is really nice from TTI. They don't provide the exhaust tip hanger trunk support plate. I'll need to source those. All my sheet metal under the car is new. Locating the proper spot is easy since there are indents already in the pan.

Sent from my iPhone using Tapatalk Pro

71Cuda · December 19, 2018, 05:41:53 PM

Steering wheel pics

Sent from my iPhone using Tapatalk Pro

Chryco Psycho · December 19, 2018, 08:19:17 PM

That exhaust will move some serious air !!

anlauto · December 20, 2018, 04:05:51 AM

Did you request that the tips NOT be welded on ?

Every system I've bought from TTI the tips were nicely welded in place....
I wouldn't drill the holes in the trunk floor based on the pan indents....I would align the exhaust tips in the cut-outs first then drill the holes for the hangers

71Cuda · December 20, 2018, 06:55:06 AM

Quote from: anlauto on December 20, 2018, 04:05:51 AM
Did you request that the tips NOT be welded on ? Every system I've bought from TTI the tips were nicely welded in place....
I wouldn't drill the holes in the trunk floor based on the pan indents....I would align the exhaust tips in the cut-outs first then drill the holes for the hangers

Alan, this is great advice and thank you very much. As for the tips being welded on from the factory... I wasn't offered this option and I bought direct (easy enough to do).

I use the indents and guides, I've never had one outside that area. Usually if its that far off I adjust the hanger on the pipe.

Cuda Cody · December 20, 2018, 07:33:50 AM

anlauto · December 20, 2018, 10:16:14 AM

The TTI systems I've installed have not been far off at all, however you don't want to learn that it is "after" you drill the holes.

71Cuda · December 20, 2018, 10:29:12 AM

Quote from: anlauto on December 20, 2018, 10:16:14 AM
The TTI systems I've installed have not been far off at all, however you don't want to learn that it is "after" you drill the holes.

So true and spoken like a pro.

Sent from my iPhone using Tapatalk Pro

71Cuda · December 31, 2018, 01:09:04 PM

The beginnings of the intercooler

Sent from my iPhone using Tapatalk Pro

1971 Dodge Challenger Convertible Pro-Touring Hellcat 6.2L 376 V8 Manual 6-SPD Started by MasonDaniel7 on Cars For Sale or Wanted	4 Replies 788 Views	Last post: May 05, 2021, 11:06:04 AM by IRON MAN
Charger Hellcat vs. Mustang GT500 ( Hellcat Fail! ) Started by 700 AKN on General Topics	7 Replies 911 Views	Last post: May 06, 2020, 10:31:07 AM by HP2
1970 AAR Cuda, Hellcat swap Started by LoStHeMi on Cars For Sale or Wanted	15 Replies 1103 Views	Last post: May 09, 2024, 12:38:57 PM by anlauto
1970 CUDA BARRACUDA HELLCAT DRIVETRAIN Started by MasonDaniel7 on E-Body stuff found on Ebay, Craigslist or anywhere else	1 Replies 750 Views	Last post: January 07, 2020, 03:40:38 AM by anlauto
1971 Plymouth CUDA Hardtop/Coupe HEMI CUDA Tribute Started by MasonDaniel7 on Cars For Sale or Wanted	3 Replies 822 Views	Last post: July 21, 2021, 07:33:57 PM by cuda hunter