Main Menu

Our 72 'Cuda project

Started by Mrbill426, September 26, 2017, 07:52:34 PM

Previous topic Next topic

0 Members and 4 Guests are viewing this topic.

Chryco Psycho

The wiper motor should be cad plated , I believe the booster was too in 72

Mrbill426

Ok, thanks  :takemymoney:

:wrenching:



Quote from: Chryco Psycho on October 01, 2017, 08:05:44 PM
The wiper motor should be cad plated , I believe the booster was too in 72

Mrbill426

Looks great  :bigthumb:


Quote from: usraptor on October 01, 2017, 06:19:32 PM
I also had to replace the panel that the Hood hinges attach to on the inner fender.  It wasn't too hard a job.  Course I can say that since I'm not the one who did the work, but I watched as it was done.   Sorry about the pictures being in reverse order, I had o search for them and they were out of order.


Mrbill426

Some more teardown pics...







If anyone sees anything along the way that does not look right please speak up  :please:

:wrenching:

Mrbill426


Carpet's out



Surprised to see black seam sealer.  Makes me wonder is it was repaired later on.  Or is that normal from factory?    :thinking:



Probably the worst part of the passenger compartment floor




Chryco Psycho


Mrbill426

Trunk not so pretty






Looks like roof patch or somthing  :dunno:






And from below, a thin piece of scrap sheet (tin?) held in by a bolt?
   :notsure:  Does that exhaust hanger look right?





Chryco Psycho

repairable at least .
the exhaust hanger was through the trunk floor originally so they adapted using the frame rail instead , not factory though

Cudajason

Quote from: Chryco Psycho on October 02, 2017, 10:52:44 PM
repairable at least .
the exhaust hanger was through the trunk floor originally so they adapted using the frame rail instead , not factory though

I agree its repairable, but disagree on the exhaust hanger.

I believe I have seen a post on that other board, indicating that those types of exhaust hanger was correct for the later year cars.



Jason
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.


1 Wild R/T

Quote from: Cudajason on October 03, 2017, 10:17:48 AM
Quote from: Chryco Psycho on October 02, 2017, 10:52:44 PM
repairable at least .
the exhaust hanger was through the trunk floor originally so they adapted using the frame rail instead , not factory though

I agree its repairable, but disagree on the exhaust hanger.

I believe I have seen a post on that other board, indicating that those types of exhaust hanger was correct for the later year cars.

Exactly.... I have a few pieces of that style hanger floating around here someplace...


Jason

Chryco Psycho

Ok wrong again , , don't recall those on the 74 I had


1 Wild R/T

Quote from: Chryco Psycho on October 03, 2017, 11:07:57 PM
Ok wrong again , , don't recall those on the 74 I had

Neal, we've both probably forgotten more than we remember at this point... 

Only reason I know about these is cause those brackets are laying out in my shop somewhere & I see them every few months...

Mrbill426

This is what is left of the hangers I took off the car


anlauto

The top two are not correct 1972 E Body exhaust hangers :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Chryco Psycho

Quote from: 1 Wild R/T on October 03, 2017, 11:11:28 PM
Quote from: Chryco Psycho on October 03, 2017, 11:07:57 PM
Ok wrong again , , don't recall those on the 74 I had

Neal, we've both probably forgotten more than we remember at this point... 

Only reason I know about these is cause those brackets are laying out in my shop somewhere & I see them every few months...

That is true & to make things worse I have not been around them at all  for 7 years now living in Panama