Main Menu

side windows

Started by roguedc72, December 21, 2017, 04:09:09 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

roguedc72

I'm just venting tonight because I recently reinstalled the side glass in my 72 Challenger. After tearing this car down the bare unibody ( not one bolt,nut or screw left in) and putting it back together, I'm finding the side glass and regulators to the most difficult,aggravating parts to put back in and get adjusted, it's like doing algebra and geometry at the same time! What  a pain! I'll be tweaking these windows forever more! Ok,I feel a little better.

Spikedog08

Yeah a pain in the ass . . Unless you have a convertible . . Then much easier!   :clapping:  Good luck! 

Check this thread . . https://forum.e-bodies.org/body-shop/5/cuda-door-and-side-window-replacement/371/
Drive it like you stole it . . . And they're CHASING you!

RUNCHARGER

Just stick with it, it's not that bad really. I think the secret is patience and wanting it perfect. Alan is a good guy to ask if you are having any recurring problems.
Sheldon


usraptor

Quote from: Spikedog08 on December 21, 2017, 04:16:01 PM
Yeah a pain in the ass . . Unless you have a convertible . . Then much easier!   :clapping:  Good luck! 

Check this thread . . https://forum.e-bodies.org/body-shop/5/cuda-door-and-side-window-replacement/371/

I went through this same issue a few months back and agree it's a PIA.  However, I did find this referenced thread very helpful along with a large dose of patience and trial and error.  Good luck.