Main Menu

Vinyl top trim

Started by fireguyfire, September 29, 2019, 06:35:51 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

fireguyfire

At some point in time the factory vinyl top was removed from my car after it was repainted; I'm in the process of putting her back to factory spec and I am missing the trim piece that goes around the very bottom of the vinyl top, below the rear window from C pillar to C pillar.
Found this set on eBay but the guy isn't 100% sure that it is the lower vinyl top trim piece. Can anyone help me out by eyeballing the picture; is this the correct trim I need for my 73?

RUNCHARGER

Hard to say, make sure it isn't for an SE.
Sheldon

truckinman466

Looks like it. You can buy new for around the same price. Try  Dave at Roseville Moparts


7E-Bodies

1970 Challenger R/T Numbers Matching 440 Auto in F8 Quad Green

mccannix

...yes it is vinyl top trim but make sure its not for Cuda as it is different than Challenger.

If you are stuck getting a set, let me know as I have both.
No border to deal with from Ontario to Alberta :unitedstates: :canada:
No matter where you get them, shipping will cost,  as they are awkward to package

MoparDave

yes the rear trim is available https://www.rosevillemoparts.com/product/vinyl-top-molding-set-70-74-challenger/   member cost on this is 168.00 + fedex.

retainer kit for the above molding set.  https://www.rosevillemoparts.com/product/vinyl-top-molding-trim-clip-kit-70-challenger/


you will also need the A pillar trim pieces that are NOT being made.
Please Email me at david.radcliffe@golling.com or through the the website. https://www.rosevillemoparts.com/contact-us/

7E-Bodies

I've been rat holing a set for future projects.
1970 Challenger R/T Numbers Matching 440 Auto in F8 Quad Green


lphfh

Does anybody have a picture as to how these little A-Pillar Trim Pieces mount. 

7E-Bodies

There will be screw holes in the lower a pillars to guide you. If you need me to, I'll be glad to shoot some pictures in reply. Let me know.

Kevin
1970 Challenger R/T Numbers Matching 440 Auto in F8 Quad Green

lphfh

I'll check tomorrow to see if holes are there. Car had been repainted without vinyl top. Discovered vinyl top trim holes during body prep. Pretty sure I have it figured out but will let you know if I need a picture. Thanks

7E-Bodies

More than glad to walk ya through it or get you some measurements if need be.

Kevin
1970 Challenger R/T Numbers Matching 440 Auto in F8 Quad Green