Main Menu

1973 Challenger L31 - fender hole locations

Started by 6bblgt, June 11, 2021, 01:22:08 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

6bblgt

does anyone have the hole pattern & dimensions for the fender turn signal indicators for a '73 Challenger?    :help:    @Burdar

Burdar

Sorry, I do not.  That was one of the things I messed up on my car.  I had a 72 fender that I was going to use until I decided to use Goodmark fenders.  The body shop used that 72 fender to drill the fender mount turn signal holes.   :'(

We had to use an air grinder to open up one hole to 73 size AFTER the car was painted.  The other hole was too large since 73 uses a screw to attach the turn signals instead of a stud/nut.  Since I couldn't use a screw I bought two philips head machine screws and used a nut to attach them.  They look correct from up top but they aren't attached correctly underneith.

Shoooter

Are the hole locations different from a 1970 challenger?


Burdar

Yes.  73 and 74 have one very large hole and one small hole for the attaching screw.

three two barrels

I can take some dimensions and measurements tomorrow from my 74 if that helps you.

6bblgt

Quote from: three two barrels on June 11, 2021, 04:43:23 PM
I can take some dimensions and measurements tomorrow from my 74 if that helps you.

thanks, that would/should be the same!  :twothumbsup:

three two barrels

large hole is 11/16 diameter


6bblgt