71 Heater box stamping Info Needed for Cuda

[Convertcuda]

Would anyone have a picture of A 71 heater box stamping? Its not the same as a 70. I need to the dimension of square box that goes around the stamp? The picture below does not give me enough information. Ken 715-432-5080

[anlauto]

The one I have measures 3 1/8" X 1 13/16" to the outside edges of the box.  @Cuda Cody do we not have this stamp on file ?

[Convertcuda]

Hi Alan,

Could you please post a pic? If could lay a ruler next to it would be great. I did not see one on this site.

Ken

[anlauto]

I don't have the heater box here anymore. I took those measurements off of the stamp I have. I have a collection of over 30 different stamps now...

[Convertcuda]

Thank you Alan!!!!!!!! I trust your measurements but if anyone could double this on there box would be great.


Thanks Ken

[Cuda Cody]

I don't have a good 71 example to build perfect artwork off of so I have not done it yet.  If we can get a perfect straight on shot with clean font edges and measurements I can replicate it.

[71vert340]

 Here's a couple of photos of mine. Looks like 2-13/16" long. Sorry I can't help you with the other dimension. I plan on pulling mine soon and going through it. I thought about correcting the factory stamp but I probably will leave it as is..

Terry

[71vert340]

 A couple of more but not much help.
TW

[Convertcuda]

Thank you very much for the effort. Anyone else got the height?

Ken

[anlauto]

Funny how the yellow box on his heater box is clearly a different size then my sample picture....his looks closer to yours...

[76orangewagon]

I found my heater box paint stamp and took a couple measurements if you still need them, looks like 2.825" x 1.625" to the outside of the box.

[76orangewagon]

I don't have a good 71 example to build perfect artwork off of so I have not done it yet.  If we can get a perfect straight on shot with clean font edges and measurements I can replicate it.

Cody,
Here are some pictures of the stamp I got from Sylvain, I can even send you the stamp if you'd like. The letters are 3/8" tall.  My heater stamp did not have a space between the 4th and 5th number like some of the examples posted above.

[cudaize]

Here's the stamp from my 71 340 CUDA heater.  I made the box 1-3/8 x 2-3/4.