Picture needed M38

[cuda hunter]

Can anyone help me out with what moldings are labeled M38? 

This car has two codes I have not seen on any other tags I have.

A46 and M38.

A46 is not available with M46.     

Would M38 be the three piece metal on the rear tail panel that is actually on the deck lid and the rear turn downs of the quarter panel?   Not M88 that is the four piece that goes on the inset of the rear panel? 

And what is the A46?  I see it's a molding option, but why is this the only M38 that I have ever seen?   

BH23C0B242313

[cuda hunter]

I have looked through several hundred pictures of fender tags and broadcast sheets on both 70 and 71's and have yet to see M38 or A46.

I did see A47 on a FAKE tag.  Not valid. 

[anlauto]

That's a mystery      

[cuda hunter]

Well, there is an M46 with M88.  But that M88 is the special ordered item on that car and M38 is not coded on the fender tag since the car is an M46 optioned car that came with the 3 piece rear trim on the M46 package.  Subsequently the M38 is not coded on the fender tag since it is part of the M46 option. 


Since wheel well trim was not available or a special ordered item on a BH barracuda, could the A46 be the code for the customer (possible) ordered wheel well trim? Being the only code to get the wheel well trim on the car. 

[EV2RTSE]

Found this-

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/121557/1970-barracuda-code-m48-what-is-it.html

Post 121565

"The A46 package included these mouldings;
upper door frame, drip rail, grille surround, wheel lip, & deck lid.

Upper door frame moldings were not available on E-Bodies (no upper door frames) but both cars are coded for;

Drip Rail Mouldings - M21

Wheel Lip Mouldings - M26

Deck Lid Lower Mouldings - M38

So, the grille mouldings may be the M48........"

[Skdmark]

From the salesman pocket guide on A46. The dagger icons next to the grille and trunk moldings ref mean they are only available as part of a group package.
The White book has M38 as the deck lid finish panel moldings. I would take that as the 3pc quarter-trunk-quarter combination.

[YYZ]

IMHO the M38 is as likely to be a typo for M88.  The 3 piece and 4 piece tail trim are both coded M88 for '70 depending on whether it's a Gran Coupe or a 'Cuda.

On the other hand, with the A46 moulding group, that should have included belt (top of door) mouldings, which are not on the tag. 

Perhaps someone was freestyling on the fender tag machine that day

[cuda hunter]

Found this-

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/121557/1970-barracuda-code-m48-what-is-it.html

Post 121565

"The A46 package included these mouldings;
upper door frame, drip rail, grille surround, wheel lip, & deck lid.

Upper door frame moldings were not available on E-Bodies (no upper door frames) but both cars are coded for;

Drip Rail Mouldings - M21

Wheel Lip Mouldings - M26

Deck Lid Lower Mouldings - M38

So, the grille mouldings may be the M48........"

Interesting post. 
It's unfortunate that old barry won't share any info but collects it. 
It was mentioned, that the M46 always had M88 on it but I have Zero M46 barracuda with M88, the 4 piece tail panel trim,  and it is totally different than the M38 3 piece rear trim. 

[cuda hunter]

From the salesman pocket guide on A46. The dagger icons next to the grille and trunk moldings ref mean they are only available as part of a group package.
The White book has M38 as the deck lid finish panel moldings. I would take that as the 3pc quarter-trunk-quarter combination.

Thanks for posting that. 
I need to get me one of those salesman guides. 

[cuda hunter]

IMHO the M38 is as likely to be a typo for M88.  The 3 piece and 4 piece tail trim are both coded M88 for '70 depending on whether it's a Gran Coupe or a 'Cuda.

On the other hand, with the A46 moulding group, that should have included belt (top of door) mouldings, which are not on the tag. 

Perhaps someone was freestyling on the fender tag machine that day

I can't find a gran coupe fender tag or build sheet that has M88 on it. 
Plenty of pictures of gran coupe 3 piece trim that separates the argent from the body paint color.
Same as M46 that separates the organasol black from the body color.
The Cuda's with the 4 piece trim has the black out on the tail panel only and it seems every BS car has M88 on the fender tag. 

[6bblgt]

my take: the grille & rear mouldings are borrowed from the Gran Coupe (wonder if they also got black grilles and/or argent tail panels?)

[6bblgt]

@cuda hunter the tag you posted is the 4th car I've seen evidence for with A46, there were ~ 322 built
here's a broadcast sheet that was on eBay years ago 

[cuda hunter]

That broadcast sheet appears to also have M38 on the mouldings section. 

Thanks for posting  BH23G0B22107x   

[6bblgt]

That broadcast sheet appears to also have M38 on the mouldings section. 

Thanks for posting  BH23G0B22107x   

yes, they are part of the A46 package

[Smallblock340]

@cuda hunter
Here is another picture of a Fender Tag w/ M38 and A46 option. For sale @ Facebook Marketplace in August 2023.