Main Menu

Rear Brake Lines - Am I doing something wrong?!?!

Started by Yellow71Cuda, May 18, 2019, 10:55:07 AM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Yellow71Cuda

So I purchased new rear brake lines many years ago.  I go to install them today,  :wrenching: and they appear too short.  Package label states the correct application, but  :help: 

Thoughts?   


RUNCHARGER

Most likely mispackaged, they are likely B-Body lines.
Sheldon

Yellow71Cuda

Quote from: RUNCHARGER on May 18, 2019, 11:08:25 AM
Most likely mispackaged, they are likely B-Body lines.

Thank you.   :handshake:

New lines ordered.  Anyone need some B-Body rear brake lines?  I don't think I can return these after 10+ years.  :haha:


anlauto

I would order from Fine Lines....The Paddock ? Are they still around ? Depending on how fussy you are you could likely make those work as well :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Yellow71Cuda

Quote from: anlauto on May 18, 2019, 02:00:55 PM
I would order from Fine Lines....The Paddock ? Are they still around ? Depending on how fussy you are you could likely make those work as well :alan2cents:

I think The Paddock is long gone.  I ordered the new set (as well as fuel pump to carb lines) from Classic Industries.  I'm fairly fussy, so...I'm sure I could make these work, but then not be able to sleep at night.   

anlauto

 :haha: yea me too....I certainly would lose sleep over a short cut like that... :drinkingbud:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

captcolour



Yellow71Cuda

#7
Quote from: captcolour on May 19, 2019, 04:47:34 AM
Wonder if they would fit a '69 Roadrunner  :thinking:

I can measure the lines if that helps. 

Passenger Side: 36"
Driver Side: 15.25"

fireguyfire

I just had the same issue with a brand new set from fine line for the 8 3/4" sure grip in my 73 challenger .
The label said they were good for all 8 3/4" 70-73 e body 8 3/4's; turns out they only fit Dana 60's (this was a stainless set).
Went to a local parts guy and bought a steel set and they fit perfectly.
I'm thinking the label on my first set is misleading.


Sent from my iPhone using Tapatalk

Yellow71Cuda

Quote from: fireguyfire on May 19, 2019, 06:19:46 AM
I just had the same issue with a brand new set from fine line for the 8 3/4" sure grip in my 73 challenger .
The label said they were good for all 8 3/4" 70-73 e body 8 3/4's; turns out they only fit Dana 60's (this was a stainless set).
Went to a local parts guy and bought a steel set and they fit perfectly.
I'm thinking the label on my first set is misleading.


Sent from my iPhone using Tapatalk

Now I'm concerned about the new set I ordered yesterday.  Here's the description:

"ERA7001S - 1970-73 Mopar E-Body With Dana Or 8-3/4" Rear Axle 2 Piece Stainless Steel Rear Axle Brake Line"

anlauto

In 1970-74 All E-Body rear axle brake lines should be the same reguardless of whether or not it's a Dana 60 or 8 3/4  :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


fireguyfire

Quote from: Yellow71Cuda on May 19, 2019, 06:34:41 AM
Quote from: fireguyfire on May 19, 2019, 06:19:46 AM
I just had the same issue with a brand new set from fine line for the 8 3/4" sure grip in my 73 challenger .
The label said they were good for all 8 3/4" 70-73 e body 8 3/4's; turns out they only fit Dana 60's (this was a stainless set).
Went to a local parts guy and bought a steel set and they fit perfectly.
I'm thinking the label on my first set is misleading.


Sent from my iPhone using Tapatalk

Now I'm concerned about the new set I ordered yesterday.  Here's the description:

"ERA7001S - 1970-73 Mopar E-Body With Dana Or 8-3/4" Rear Axle 2 Piece Stainless Steel Rear Axle Brake Line"




Sent from my iPhone using Tapatalk

fireguyfire

Quote from: Yellow71Cuda on May 19, 2019, 06:34:41 AM
Quote from: fireguyfire on May 19, 2019, 06:19:46 AM
I just had the same issue with a brand new set from fine line for the 8 3/4" sure grip in my 73 challenger .
The label said they were good for all 8 3/4" 70-73 e body 8 3/4's; turns out they only fit Dana 60's (this was a stainless set).
Went to a local parts guy and bought a steel set and they fit perfectly.
I'm thinking the label on my first set is misleading.


Sent from my iPhone using Tapatalk

Now I'm concerned about the new set I ordered yesterday.  Here's the description:

"ERA7001S - 1970-73 Mopar E-Body With Dana Or 8-3/4" Rear Axle 2 Piece Stainless Steel Rear Axle Brake Line"

That's what the label on my set said.
Let us know what happens when your new set arrives


Sent from my iPhone using Tapatalk

fireguyfire

I don't have a photo of the label on my first set unfortunately as I used them in partial trade for my new set that fit nicely.
The guy I got my new set from is a large Mopar only parts specialist and said he had ran across this before.


Sent from my iPhone using Tapatalk

Yellow71Cuda

Quote from: fireguyfire on May 19, 2019, 06:54:05 AM
I don't have a photo of the label on my first set unfortunately as I used them in partial trade for my new set that fit nicely.
The guy I got my new set from is a large Mopar only parts specialist and said he had ran across this before.


Sent from my iPhone using Tapatalk

Great information.  Thank you!   :cheers:

I will update once the new set arrives.