Main Menu

VALVE COVER BREATHER ON T/A

Started by B54SPEED, October 30, 2017, 07:26:05 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

B54SPEED

What would be the correct breather for T/A





1 Wild R/T

  Is there an N95 on the fender tag?

Roadman

Quote from: 1 Wild R/T on October 30, 2017, 08:07:40 AM
  Is there an N95 on the fender tag?

                California Emmisions ??

FlatlandTA

Single


Sent from my iPhone using Tapatalk


1 Wild R/T


B54SPEED

Quote from: 1 Wild R/T on October 30, 2017, 08:07:40 AM
  Is there an N95 on the fender tag?

No N95 on my tag

6bblgt

#9
let's try this again  :rubeyes:

CRANKCASE VENT INLET AIR CLEANER AND OIL FILLER
all engines 1970 1970-'71 Parts Catalog (January 1972 version) 10-01-21

3462094 = one hose for ALL w/o N95 - 1 to air cleaner
3462095 = two hose /6 with N95  (CA emissions) - 1 to air cleaner, 1 from gas tank vent
3462096 = three hose for V8 equipped with N95 (CA emissions) - 1 to air cleaner, 1 from center carb bowl vent, 1 from gas tank vent

Eng., J 1970 Barracuda/Challenger 3462069

6bblgt

the 1970-'71 Parts Catalog (January 1972 version) lists the 2-nipple 3462095 breather as:

1970 all /6 with ECS (N95)
1971 all /6


/6 carburetors do NOT have a bowl vent


anlauto

I thought AARs/TAs had a two nipple breather ?

Here's my original carbs, and I'm pretty certain my CDN car didn't have California emissions

If only a single, then where would you vent the carb to ?
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Spikedog08

Drive it like you stole it . . . And they're CHASING you!

6bblgt

thanks @anlauto , yes all 340+6 center carbs have a bowl vent

so, what did production line AAR & T/A (non-N95) cars recieve?
3-nipple like the Parts Catalog lists (how were the hoses routed, what was plugged/capped?)
or
2-nipple /6 part?

any survivor/original engine compartment pics?

Aar1064

Quote from: 6bblgt on October 30, 2017, 01:21:00 PM
thanks @anlauto , yes all 340+6 center carbs have a bowl vent

so, what did production line AAR & T/A (non-N95) cars recieve?
3-nipple like the Parts Catalog lists (how were the hoses routed, what was plugged/capped?)
or
2-nipple /6 part?

any survivor/original engine compartment pics?

I went through this as mine was missing. Of all the survivor pics I saw including the low mileage TA, all had a single and the center car vent had nothing on it so I went with a single.