Main Menu

Attaching aftermarket Amp to battery.

Started by Fern, July 16, 2022, 09:47:10 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Fern

Has anyone figured out how to run a wire from an aftermarket Amp to the positive side of battery terminal and still look good?
Don't want to cut the battery wire and put a splice in. Right now I just have the wire on the screw that tightens the terminal. Looks sloppy.

Dakota

 :popcorn:   I have the same issue... 2 wires off the screw terminal in my case.

Scooter

If your battery has allocation for side posts you can install it there almost out of sight.


Katfish

Run the 12V feed to the starter relay post.
Use ring terminal and it looks stock.

Skdmark

#4
I needed a couple of extra battery connections between the EFI (Sniper) and an AMP so I picked up a pair of these for the side posts. They have been real handy.
Terminal Mounts



You are not entitled to your opinion. You are entitled to your informed opinion. No one is entitled to be ignorant.
-Harlan Ellison

(O OI====II====IO O)    (O O{]{]{] ][ [}[}[}O O)
:stayinlane:

Fern

I just made my own end piece to at least clean it up for now

Fern



Katfish

Relay on fender apron is out of sight, and the battery feed is already there........