Attaching aftermarket Amp to battery.

[Fern]

Has anyone figured out how to run a wire from an aftermarket Amp to the positive side of battery terminal and still look good?
Don't want to cut the battery wire and put a splice in. Right now I just have the wire on the screw that tightens the terminal. Looks sloppy.

[Dakota]

    I have the same issue... 2 wires off the screw terminal in my case.

[Scooter]

If your battery has allocation for side posts you can install it there almost out of sight.

[Katfish]

Run the 12V feed to the starter relay post.
Use ring terminal and it looks stock.

[Skdmark]

I needed a couple of extra battery connections between the EFI (Sniper) and an AMP so I picked up a pair of these for the side posts. They have been real handy.
Terminal Mounts

[Fern]

I just made my own end piece to at least clean it up for now

[Fern]

With battery

[Katfish]

Relay on fender apron is out of sight, and the battery feed is already there........