Wire Identification Help

[Daveh]

Hi Guys,

I took the dash out because the previous owner completely butchered the wiring and I purchased a new harness.  I'm getting to the end and need a little help on what these last few wire are for.  Can you identify them and where they go?  The black one I'm figuring is a ground but with the bullet end I'm not certain where it goes.  Thanks for the help. 

Dave

[shawge]

What year?

[shawge]

Assuming 70:

red & pink elbow female bullet - cigarette lighter

yellow & yellow female bullet - likely map

if double orange and blue T has a red w/ white stripe - radio

black male bullet - parking brake

Need to see shape and #/color of wires for remaining connector

[Daveh]

1971 Challenger Convertible.

[shawge]

Some slight diffs between 70/71.  71 color chart here:
https://forum.e-bodies.org/electrical-and-audio/11/colored-wiring-diagrams-70-cudachallenger/1349/msg113614#msg113614

[Daveh]

Ok 2 more follow-ups:

1. The double yellow wire with the female connector in picture #3?  What is that for and where does that go?

2. The parking brake black male bullet connector (pic #2) - where does that connect?  It wasn't even on the old harness.

[Chryco Psycho]

the black wire plugs into a switch on the park brake pedal

[Daveh]

Ok so I'm stupid or something.     Is there a wire off of the parking brake?  If so mine doesn't have it.  Do you have a picture?  Like I said the previous owner had it all butchered up.  Here is a picture of mine.

[Chryco Psycho]

no wire , it is a socket , I will look for a good picture

[Claudia]

Hopefully these help . . . switch is located just above the rubber bumper for the pedal.

[Claudia]

Here are some additional pictures that should assist . . .

[Daveh]

That's perfect thanks. I just overlooked it.  I guess I need to work with better lighting.   

[shawge]

For 1: since it is close the the radio connector, I think it is for the time delay relay circuit.  It's a no connect if you do not have the A01 light option.

Ok 2 more follow-ups:

1. The double yellow wire with the female connector in picture #3?  What is that for and where does that go?

2. The parking brake black male bullet connector (pic #2) - where does that connect?  It wasn't even on the old harness.