Main Menu

Aftermarket A/C Condenser Mounting Question

Started by Daveh, December 22, 2018, 07:53:25 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Daveh

Hey guys,

I bought an aftermarket A/C from Bouchillon Performance and the condenser is different from the original.  For those that have installed one of these aftermarket condensers, does anyone have any pics of how they mounted theirs?  Thanks 

GoodysGotaCuda

I dont have pictures, but vintage air has brackets for theirs that bolt in.
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs

jt4406

I used the biggest condenser I could find (not from any of the big add on ac suppliers, VA or CAA), just a generic "fit all", sold by outside dimensions.  Anyway, I just fabbed up simple "L" shaped brackets. I did place thick rubber washers between the bracket and the lower radiator brace (you can just see the lower passenger side one in the pic) for it to sit on and to absorb some vibration. May not work for you, just "how I did it".

jess
"Yeah, it's hopped up to over 160........"


Daveh

UPDATE - I just got off of the phone with Vintage air and spoke with a super nice guy.  He was very helpful.  The brackets for their kits is a little shorter and wont fit.  My condenser is 16" tall and theirs is only 22"'s tall.  So I guess I'll have to fab something up.  Thanks