Engine mounts ?

[anlauto]

Does anybody make a quality motor mount comparable to Poly-loc mounts ? Or any idea where to get Poly-loc mounts ?

[Mrbill426]

Schumacher mounts

https://www.engine-swaps.com/Pages/ProductsType/PolyLoc.html

[anlauto]

Schumacher mounts

https://www.engine-swaps.com/Pages/ProductsType/PolyLoc.html

I've been trying for a couple of months to contact them, just sent another email...see how that goes.

[Mrbill426]

Well they are in Seattle so who knows their current business status; it's a real general cluster state-wide in Washington right now.  Good luck 

Schumacher mounts

https://www.engine-swaps.com/Pages/ProductsType/PolyLoc.html

I've been trying for a couple of months to contact them, just sent another email...see how that goes.

[Bullitt-]

  https://www.manciniracing.com/enginemounts.html

Mancini probably has what your looking for ... I've heard good things about their "Mag Mount"
https://www.manciniracing.com/maheduenmo.html

   

[Mrbill426]

Mancini sells Schumacker made mounts too if you cannot reach them directly.

  https://www.manciniracing.com/enginemounts.html

Mancini probably has what your looking for ... I've heard good things about their "Mag Mount"
https://www.manciniracing.com/maheduenmo.html

[anlauto]

  https://www.manciniracing.com/enginemounts.html

Mancini probably has what your looking for ... I've heard good things about their "Mag Mount"
https://www.manciniracing.com/maheduenmo.html

Thanks ! I went for their Mag Mounts instead....nobody seems to have the Poly-locs in stock..

[kawahonda]

I use magmounts...no complaints!

[Burdar]

There is a big post on Moparts about Schumacher mounts.  It looks like they are out of business.  No one has been able to get in touch with them for awhile.  The owner had some health issues and might have just closed up shop. 

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/2774765/schumacher-creative-engine-swaps-com-what-happened.html#Post2774765

[Mrbill426]

Ouch that is sad to hear for him and the community 

There is a big post on Moparts about Schumacher mounts.  It looks like they are out of business.  No one has been able to get in touch with them for awhile.  The owner had some health issues and might have just closed up shop. 

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/2774765/schumacher-creative-engine-swaps-com-what-happened.html#Post2774765

[73Challengr]

Bought a set of mity mounts last week. In stock, quick shipping, owner answered the phone and questions, nice guy. Will get them installed next week.

http://mitymounts.com/chrysler.htm

[dodj]

I use magmounts...no complaints!

As do I. Have them holding down the 440 for around 10 years now.

[Mrbill426]

Do those magmounts have a through fastener holding the halves together?

I use magmounts...no complaints!

[gzig5]

Do those magmounts have a through fastener holding the halves together?

I use magmounts...no complaints!

Yes. There is a bolt holding them together.  I made my own using $8 mounts and a $1.00 bolt.  Helps to have the right tooling and a drill press or mill but can be done otherwise if you are clever.  Big flathead bolt with a nylock nut on the other side so the rubber can do it's job. I also swapped the nut on the tab so the driver side bolt will go in from the front and not require the header to come loose. 

[Mrbill426]

Yup 

Do those magmounts have a through fastener holding the halves together?

Yes. There is a bolt holding them together.  I made my own using $8 mounts and a $1.00 bolt.  Helps to have the right tooling and a drill press or mill but can be done otherwise if you are clever.  Big flathead bolt with a nylock nut on the other side so the rubber can do it's job. I also swapped the nut on the tab so the driver side bolt will go in from the front and not require the header to come loose.