Main Menu

Engine mounts ?

Started by anlauto, June 08, 2020, 09:28:15 AM

Previous topic Next topic

0 Members and 3 Guests are viewing this topic.

anlauto

Does anybody make a quality motor mount comparable to Poly-loc mounts ? Or any idea where to get Poly-loc mounts ?
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


anlauto

Quote from: Mrbill426 on June 08, 2020, 09:33:09 AM
Schumacher mounts

https://www.engine-swaps.com/Pages/ProductsType/PolyLoc.html

I've been trying for a couple of months to contact them, just sent another email...see how that goes. :huh:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


Mrbill426

Well they are in Seattle so who knows their current business status; it's a real general cluster state-wide in Washington right now.  Good luck  :twothumbsup:



Quote from: anlauto on June 08, 2020, 09:38:28 AM
Quote from: Mrbill426 on June 08, 2020, 09:33:09 AM
Schumacher mounts

https://www.engine-swaps.com/Pages/ProductsType/PolyLoc.html

I've been trying for a couple of months to contact them, just sent another email...see how that goes. :huh:

Bullitt-


  https://www.manciniracing.com/enginemounts.html

Mancini probably has what your looking for ... I've heard good things about their "Mag Mount"
https://www.manciniracing.com/maheduenmo.html

   
.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       

Mrbill426

Mancini sells Schumacker made mounts too if you cannot reach them directly.



Quote from: Bullitt- on June 08, 2020, 10:00:44 AM

  https://www.manciniracing.com/enginemounts.html

Mancini probably has what your looking for ... I've heard good things about their "Mag Mount"
https://www.manciniracing.com/maheduenmo.html



anlauto

Quote from: Bullitt- on June 08, 2020, 10:00:44 AM

  https://www.manciniracing.com/enginemounts.html

Mancini probably has what your looking for ... I've heard good things about their "Mag Mount"
https://www.manciniracing.com/maheduenmo.html



Thanks ! I went for their Mag Mounts instead....nobody seems to have the Poly-locs in stock..
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


kawahonda

I use magmounts...no complaints!
1970 Dodge Challenger A66

Burdar

There is a big post on Moparts about Schumacher mounts.  It looks like they are out of business.  No one has been able to get in touch with them for awhile.  The owner had some health issues and might have just closed up shop. 

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/2774765/schumacher-creative-engine-swaps-com-what-happened.html#Post2774765

Mrbill426

Ouch that is sad to hear for him and the community  :crying:


Quote from: Burdar on June 08, 2020, 10:43:10 AM
There is a big post on Moparts about Schumacher mounts.  It looks like they are out of business.  No one has been able to get in touch with them for awhile.  The owner had some health issues and might have just closed up shop. 

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/2774765/schumacher-creative-engine-swaps-com-what-happened.html#Post2774765

73Challengr

Bought a set of mity mounts last week. In stock, quick shipping, owner answered the phone and questions, nice guy. Will get them installed next week.

http://mitymounts.com/chrysler.htm


dodj

Quote from: kawahonda on June 08, 2020, 10:16:03 AM
I use magmounts...no complaints!
As do I. Have them holding down the 440 for around 10 years now.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Mrbill426

Do those magmounts have a through fastener holding the halves together?


Quote from: kawahonda on June 08, 2020, 10:16:03 AM
I use magmounts...no complaints!

gzig5

Quote from: Mrbill426 on June 09, 2020, 09:18:09 AM
Do those magmounts have a through fastener holding the halves together?


Quote from: kawahonda on June 08, 2020, 10:16:03 AM
I use magmounts...no complaints!
Yes. There is a bolt holding them together.  I made my own using $8 mounts and a $1.00 bolt.  Helps to have the right tooling and a drill press or mill but can be done otherwise if you are clever.  Big flathead bolt with a nylock nut on the other side so the rubber can do it's job. I also swapped the nut on the tab so the driver side bolt will go in from the front and not require the header to come loose. 

Mrbill426

Yup  :bigthumb:


Quote from: gzig5 on June 09, 2020, 09:44:10 AM
Quote from: Mrbill426 on June 09, 2020, 09:18:09 AM
Do those magmounts have a through fastener holding the halves together?



Yes. There is a bolt holding them together.  I made my own using $8 mounts and a $1.00 bolt.  Helps to have the right tooling and a drill press or mill but can be done otherwise if you are clever.  Big flathead bolt with a nylock nut on the other side so the rubber can do it's job. I also swapped the nut on the tab so the driver side bolt will go in from the front and not require the header to come loose.