Main Menu

GASKET / SEAL RECOMMENDATIONS? VIDEO TESTING TESTING

Started by BIGSHCLUNK, June 05, 2018, 02:07:10 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5
User actions

1 Wild R/T

#45
July 08, 2018, 08:11:00 AM
I agree.... Fact is they don't need to be a 100% seal, they act as an oil deflector the minimal amount of oil that could get past them has no where to go....

BIGSHCLUNK

#46
July 08, 2018, 10:49:15 AM
Seals are in! Were easy to do, once I figured out they dont do in real far...  :thinking:   :haha:

BIGSHCLUNK

#47
July 09, 2018, 08:20:41 PM Last Edit: July 09, 2018, 08:58:32 PM by BIGSHCLUNK
A 90/90 night here - that is 90 in the garage and 90 dew point....  :Thud:  But I did get one V cover on. Did the  "easy" side. Plug tubes were not cooperative so I left well enough alone for today.  :wrenching:  maybe they need the freezer treatment  :notsure:

1 Wild R/T

#48
July 09, 2018, 08:22:27 PM
Did you oil them?  Just a little...

BIGSHCLUNK

#49
July 09, 2018, 08:24:50 PM Last Edit: July 09, 2018, 08:58:07 PM by BIGSHCLUNK
That's exactly what I did... thought it be way easier.  :headbang:

Topcat

#50
July 09, 2018, 08:46:05 PM
Quote from: BIGSHCLUNK on July 09, 2018, 08:20:41 PM
A 90/90 night here - that is 90 in the garage and 90 dew point....  :Thud:  But I did get one V cover on. Did the  "easy" side. Plug tubes were not cooperative so I left well enough alone for today.  :wrenching:  maybe they need the freezer treatment  :notsure:

No brake booster makes it a ton easier.

PITA when I do the D/S valve adjustment.

But at least without that nasty humidity you've got there.

BIGSHCLUNK

#51
July 10, 2018, 09:15:39 PM
Well I got the rt side cover on tonite ans 7 of 8 plugs back in. I need to make a minor adjustment on a tube seal. So  :fingerscrossed: I'm hoping to have her fired up by the weekend!!!!  :wrenching:   :banana:

BIGSHCLUNK

#52
July 14, 2018, 09:45:56 PM
Well I did a test fire/test drive tonite... I know how guys luv video's.... stay tuned  :wave:

RUNCHARGER

#53
July 14, 2018, 09:54:19 PM
We'll be checking for driver violations.
Sheldon

BIGSHCLUNK

#54
July 15, 2018, 09:22:46 AM
Allright got a video thrown together. I know you guys are all video freaks!! Not a gopro (just got a 6  :banana: ) but my old SONY..... enjoy!

RUNCHARGER

#55
July 15, 2018, 09:34:11 AM
That sounds really good. I bet those plugs look clean now. Temp gauge looks good, what was the outside temperature?
Sheldon

BIGSHCLUNK

#56
July 15, 2018, 10:35:19 AM
It was about 85 at the time of the test drive....  :burnout:

303 Mopar

#57
July 15, 2018, 10:57:41 AM
Great video!  And the kids on the overpass was awesome to see!   :banana:

1 Wild R/T

#58
July 15, 2018, 11:11:50 AM
Running clean & cool so it seems like there was some improvement..... Your Ammeter still dances when the turn signals are on which is normal but still looks worrisome.... I've gone to LED bulbs all around & it really reduced the ammeter reaction to the turn signals...  It requires electronic flashers & you have to swap the polarity of the wires to the flasher mounted on the side of the ash tray... But the lights are brighter & they don't effect the headlights of the ammeter....

BIGSHCLUNK

#59
July 15, 2018, 11:27:32 AM
Yes I've watched the ammeter dance...... but it's been converted to a volt meter....  :notsure:
Print
Go Up Pages 1 2 3 4 5
User actions

Similar Topics