How much would you offer?

[Cuda_mark]

A Sea body, non A/C, 440 is a treasure of brackets and pulleys as well. A MH 440 not so much.

One thing a motor home MIGHT have is this power steering fitting.

@Msbaugh440 if you do buy the engine, can you check to see if it has this 90 degree fitting on the steering box? I'd like to buy it if it does.

[1 Wild R/T]

A Sea body, non A/C, 440 is a treasure of brackets and pulleys as well. A MH 440 not so much.

One thing a motor home MIGHT have is this power steering fitting.

@Msbaugh440 if you do buy the engine, can you check to see if it has this 90 degree fitting on the steering box? I'd like to buy it if it does.

I have a bag of those for the earlier cars.... I'll bet I could get that size too....  Check here....   https://www.royalsupply.com/store/pc/MJ-MAORB-90-Elbow-6801-NWO-Series-c3200.htm

[Msbaugh440]

It's yours if it has one! Matt

[mopargem]

Since he is a friend of yours, I would think he would give the engine to you if you help him cut it up. Especially if he's not a Mopar or car guy. At the most whatever the value is in scrap right now which isn't a lot.

[73440]

yeah, scrap iron just went from .055 to .06 cents the other day. aint much

[Cuda_mark]

It's yours if it has one! Matt

Cool!

[Cuda_mark]

A Sea body, non A/C, 440 is a treasure of brackets and pulleys as well. A MH 440 not so much.

One thing a motor home MIGHT have is this power steering fitting.

@Msbaugh440 if you do buy the engine, can you check to see if it has this 90 degree fitting on the steering box? I'd like to buy it if it does.

I have a bag of those for the earlier cars.... I'll bet I could get that size too....  Check here....   https://www.royalsupply.com/store/pc/MJ-MAORB-90-Elbow-6801-NWO-Series-c3200.htm

Thanks for the info. Those look essentially the same but stainless or cast. I think the originals are brass.

[1 Wild R/T]

A Sea body, non A/C, 440 is a treasure of brackets and pulleys as well. A MH 440 not so much.

One thing a motor home MIGHT have is this power steering fitting.

@Msbaugh440 if you do buy the engine, can you check to see if it has this 90 degree fitting on the steering box? I'd like to buy it if it does.

I have a bag of those for the earlier cars.... I'll bet I could get that size too....  Check here....   https://www.royalsupply.com/store/pc/MJ-MAORB-90-Elbow-6801-NWO-Series-c3200.htm

Thanks for the info. Those look essentially the same but stainless or cast. I think the originals are brass.

The ones I've got are brass....  The trick is get the 6801 which gives you the right part, get the two dash numbers which gives you fitting size then take those numbers to a weatherhead retailer... Weatherhead makes their fittings out of brass...