Main Menu
avatar_Racer57

Pump for putting oil into Tremec ?

Started by Racer57, May 19, 2025, 07:44:13 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Racer57

Time to replace oil in my Tremec TKX. But it requires being pumped into it due to clearances. I've tried local autoparts stores pumps, but they don't last long or are just plane junk. Any suggestions ?

DeathProofCuda

I'm not familiar with the Tremec configuration, but typically use something like this when refilling my A833.

https://www.summitracing.com/parts/sum-900347?srsltid=AfmBOor2eh4eQu941KXg7NLd2s-CYW6qUOIDWoPiLIAlOMo4S4JGLu-faik

Old school, low tech, and a bit messy, but it works.  :dunno:

I like that it comes apart and can be thoroughly cleaned between use of different types/viscosities of lubricants.

7212Mopar

I use a few feet of the soft plastic tubing from hardware store and a funnel to fill from the engine bay for AT trans, transaxle, rear differential. Let gravity do the work. Keep an eye on how much you pour into the funnel to minimize waste.
1973 Challenger Rallye, 416 AT
2012 Challenger SRT8 6 speed Yellow Jacket


Brads70

I bought this to fill my T56 that in my Javelin. Worked great. I did only use it once so far....?
https://www.amazon.ca/dp/B086638SVP?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4

ec_co

The only thing flat earthers fear, is sphere itself.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came .... now in 4spd flavor

www.eyecandi3d.com for Reproduction Fender Tags


Tags: